52psi, it looks so simple
 

http://i.imgur.com/dceJR.png


http://www.youtube.com/watch?v=tA0QX2mx9pk&hd=1

42R'd 2G, guy kinda reminds me of swifty...speaking of which, where's swifty lately?

Re: 52psi, it looks so simple
 

Swift has a bigger tach then that.

Re: 52psi, it looks so simple
 

I need one of those shift lights.

Re: 52psi, it looks so simple
 

Damn, i hope he revs that over 9k. How does he remind you of swifty?

Re: 52psi, it looks so simple
 

Just some of the posts he made on evoM, thats all. I didn't mean much by it other than I miss havin swifty around.

Re: 52psi, it looks so simple
 

I hung out with Swifty on Christmas Eve. He is a swell fellow.

Re: 52psi, it looks so simple
 

^Word.
I was just wondering, it could be worse the guy could remind you of me!!!!!!!!!!!!!!!

Re: 52psi, it looks so simple
 

I have that tach/shift light in my car, if you want to use it make sure its on the A pillar.

And people ask why I have the 0-100psi boost gauge...

~John

Re: 52psi, it looks so simple
 

52 psi...wowsars...

Re: 52psi, it looks so simple
 

Geez, there's not enough gauges duct taped to that a-pillar.

Re: 52psi, it looks so simple
 

Because you are going to run above 60psi.

Re: 52psi, it looks so simple
 

I had a 0-35 psi in my Talon and when it read 35 psi, the AEM MAP sensor read 30psi, and when it pointed straight down it was 35psi. So gauges get a little in accurate at the top end of what the gauge can read.

Re: 52psi, it looks so simple
 

Oh yeah I forgot about that, something like at about their 90% range they start to read inaccurate, although an electronic gauge should do the trick.

Re: 52psi, it looks so simple
 

AEM 5 bar boost gauge ftw