Bunch of free/cheap parts
 

I finally got my workbench built and sorted through all my miscellaneous parts, and I have a bunch of leftover parts that I just want gone. If the free stuff doesn't go in a week or two I'm going to throw it out. Keep in mind I'm in Iowa so you'll have to pay shipping costs. Call or text 515.441.0353.

I'm deleting items off this list as they are sold, even though some are still pictured below.

Free stuff:
2g air filter (dirty)
Stock fuel feed line
Water line for turbo
Wastegate actuator (unknown turbo)
16 roller rockers
3 or 4 Inline filters for the FP oil restrictor
2" LICP
1g upper timing belt cover
Ground strap

Cheap stuff:
Valve cover - $10
Stock spark plug wires in good condition - $20
2.5" SS 180* bend IC pipe - $10
New 2g sunroof seal (was almost $100 from dealer) - $30
OFH to -4 adapter for turbo oil feed - $5
1g BOV to TurboXS style adapter - $10

Not so cheap stuff (not all pictured):
AEM 5.1 bar MAP sensor with pigtail and barb fitting - $80
Evo Brembo rear calipers - $180
3000gt front 4pot calipers - $100
New front/rear drilled+slotted rotors for 3000gt - $180
Walbro 310lph pump - $80
2g front camber kit - $50

http://mitsustyle.com/forums/attachm...chmentid=11047

Re: Bunch of free/cheap parts
 

Hay are the ross piston rings new? if they are ill take them & the crank scraper!

Re: Bunch of free/cheap parts
 

I'll take the ss fuel feed line w/ adapter.

Re: Bunch of free/cheap parts
 

Rings, scraper, taylor wires, & ngk plugs are gone. OMFGeof you have PM.

Re: Bunch of free/cheap parts
 

sent you a text on the fuel pressure sensor

Re: Bunch of free/cheap parts
 

I'll take the tial springs if you still have them!

Re: Bunch of free/cheap parts
 

PM'd eagle talon guy and brad.

Re: Bunch of free/cheap parts
 

Bump. A few people expressed interest but I haven't heard back. I'm about to throw away a bunch of free stuff like brake pads, brackets, water lines, etc.

I'll be up in Minneapolis the first week of January if you don't want to pay for shipping on items. After that a lot of the free stuff is trashed.

Re: Bunch of free/cheap parts
 

I'll take the free stuff and meet you in mpls. just tell me when.

Re: Bunch of free/cheap parts
 

Sorry guys I totally forgot to bring my box of parts to Minneapolis and I was only there for new years. I'll keep it in the garage for next time I'm up there, unless anybody wants to pay the $5 for shipping.

Re: Bunch of free/cheap parts
 

ill take the resinator
and ill pay 5 bucks to have it shipped

Re: Bunch of free/cheap parts
 

I meant on the smaller and lighter items, I don't want to lose money doing a favor by giving away parts. I would guess that would ship for $15 or so, I can get an exact number if you are serious.

Re: Bunch of free/cheap parts
 

i am and ok let me know how much

Re: Bunch of free/cheap parts
 

Ok list updated with what I have left, I'm coming up tonight to Minneapolis until Sunday and I'll bring all the free stuff. I won't be checking the board so TEXT ME at 515.441.0353 if you want to meet up.

Re: Bunch of free/cheap parts
 

I'd take the Valve Cover if it is in good condition, no cracks etc. I'm not 100 percent if I'll be in the cities by the weekend, there is a 90 percent chance I will be.

I'll text ya though, see what is up.

Re: Bunch of free/cheap parts
 

I'll bring the VC with then, it came off my car in working condition, should be ok but you'll need to clean it up.

Re: Bunch of free/cheap parts
 

Alright thanks bud, I'm gonna send it off to get powder coated. Then I can pull my other one and sell it when the time comes.

Re: Bunch of free/cheap parts
 

I will take the starter plate, ISC, and that lower thermostat housing off your hands if you don't mind.

Re: Bunch of free/cheap parts
 

Starter plate, ISC, and tstat housing in the box.

Re: Bunch of free/cheap parts
 

Thanks man