|
FS: Big 2g FMIC kit, 2g head, 6 bolt parts, 2g stuff
2g head - $50
Has cam caps and you can have the stock cams if you want. It is not assembled but I do have all the parts which you can have as well. Might have a bent valve or two. Not too sure. Sold as is 6bolt short block - $75 Had some sort of ticking said the guy I picked it from. He thought it was from a blown balance shaft bearing. I planned on building it but just don't have the time or money I once had. Sold as is 6 bolt head - $75 stock 6 bolt head minus cams Tein Flex Coilovers - $900 obo Retail on these are $1,470 from map without sales tax and shipping. Rears were just rebuilt two summers ago and barely have any miles. http://i6.photobucket.com/albums/y20...A/IMG_0772.jpg 2g o2 housing - $10 2g fuel rails - $5 (I have 2) http://i6.photobucket.com/albums/y20...A/IMG_0601.jpg Bare 7 bolt block - $5 2g rods/pistions - $20 Rods did spin a bearing but I would think most people would just want the pistions. http://i6.photobucket.com/albums/y20...A/IMG_0589.jpg 2g intake manifold - $5 2g Intercooler kit - $200 with turbo xs bov. This thing is pretty big, it's 3" think and can get other measurements if anybody would like them. Comes with mounting bracket and bolts to mount it. Fills up a 2gb bumper perfectly. There are no markings I saw on the core, but the guy I bought the car from said it was $500 just for the core. http://i6.photobucket.com/albums/y20...A/IMG_0604.jpg http://i6.photobucket.com/albums/y20...A/IMG_0605.jpg http://i6.photobucket.com/albums/y20...A/IMG_0608.jpg http://i6.photobucket.com/albums/y20.../IMG_06251.jpg It's pretty big, this is compared to my SBR/Kinetic front mount http://i6.photobucket.com/albums/y20...A/0d75b0a1.jpg Nardi Steering Wheel, NRG quick release setup - $275 http://i6.photobucket.com/albums/y20...A/fac904ee.jpg 2g stock intake - $10 http://i6.photobucket.com/albums/y20...A/IMG_0609.jpg 2g steering wheel airbag: $10 obo http://i6.photobucket.com/albums/y20...A/c0228ee2.jpg 2g shifter cables - $30 Stainless steel clutch line with slave - $20 2g SMIC shroud: Free http://i6.photobucket.com/albums/y20...A/ca1c5fab.jpg 90 degree 4ply coupler: $15 obo Does have a slight burn to it from my dump, but it does not go all the way through. I had black duct tap over it and you couldn't even tell:lol: http://i6.photobucket.com/albums/y20...A/9694ee14.jpg http://i6.photobucket.com/albums/y20...A/e385dc98.jpg Random LED Light: $5 obo http://i6.photobucket.com/albums/y20...A/cfef19b7.jpg 2ga wing (just center section): $5 http://i6.photobucket.com/albums/y20...A/e0f48fa1.jpg 1g power steering pump: $5 http://i6.photobucket.com/albums/y20...A/1a4eb247.jpg Stock 2g upic: $5 http://i6.photobucket.com/albums/y20...A/f3eeafb6.jpg Shift knob off my old celica - $5 http://i6.photobucket.com/albums/y20...A/IMG_0650.jpg GForce harnesses - $75 http://i6.photobucket.com/albums/y20...A/IMG_0649.jpg http://i6.photobucket.com/albums/y20...A/IMG_0648.jpg Knock off HKS bov - $20 http://i6.photobucket.com/albums/y20...A/IMG_0643.jpg http://i6.photobucket.com/albums/y20...A/IMG_0644.jpg Redline Heavy Shockproof - $6 brand new just dirty http://i6.photobucket.com/albums/y20...A/IMG_0647.jpg 2g rear leather seats: $50 http://i6.photobucket.com/albums/y20...A/IMG_0732.jpg http://i6.photobucket.com/albums/y20...A/IMG_0733.jpg http://i6.photobucket.com/albums/y20...A/IMG_0734.jpg The rear folding seats no longer have the bracket to bolt them down. 2g rear tails: $75 obo http://i6.photobucket.com/albums/y20...A/IMG_0738.jpg http://i6.photobucket.com/albums/y20...A/71e14f87.jpg Middle piece is black and looks really nice on any black dsm. 2g fuel pump:$50 http://i6.photobucket.com/albums/y20...A/IMG_0740.jpg Comes as pictured except no fuel pump. 2g driver and passenger mirrors: $50 a piece Black in color and in good condition. 2g non cruise control throttle cable - $30 2g shifter base assembly - $25 2ga side skirt end caps - $15 per side. Still have both. 2g front gray leather seats. Driver side is a little beat up but passenger side is near perfect. http://i6.photobucket.com/albums/y20...A/IMG_0767.jpg http://i6.photobucket.com/albums/y20...A/IMG_0770.jpg Tial bov flange: SOLD 560cc Injectors - SOLD Apexi N1 Down pipe for 2g awd - SOLD Random Battery stuff: SOLD 2g fuel line - from fuel filter to rail: SOLD 2g wheels - SOLD 2g head with stock cams - SOLD Big 16g - SOLD BNIB stock looking pistions that came with my car - SOLD AEM Wideband Sensor - SOLD 2g Eprom Ecu - SOLD 1g fucked up motor mount: threw away 2g MAF - SOLD ARP Headstuds - Sold 2g exhaust manifold - SOLD 2g water pipe - SOLD 2g Oil Dip Stick - SOLD Aeromotive Adjustable FPR - SOLD Feel free to throw out offers. The worst I can do is say no. PM or call/text at six five one. three four three. one zero five two |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
bump for pictures
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Is the 7 bolt block rebuilt and machined?
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Quote:
Let me know if you want some detailed pictures or I'd you would like to come check it out! |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
If you will ship I will take the injectors and pistons. My shipping zip is 43334.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Quote:
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
is the big 16g an mhi turbo? and is there any shaft play?
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Yes it is an mhi turbo and not there isn't any shaft play.
If you'd like to check it out just let me know! |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Tial bov flange sold
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
List updated.
Happy turkey day people! |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
List updated again.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Lowered prices on all items and added a few things like eprom ecu and steering wheel setup.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
How's the head? Valve seals leak or any issues?
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Not that I know of, I don't know much of anything about it to be honest. It was pulled of the 2g that I bought that had a spun rod bearing and I never drove the car or saw it run.
You're more than welcome to come look at or we can meet up somewhere if you want to check it out. It looked pretty clean to me. |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
I'm interested. Let me know when a good time to meet up might be, I'm usually floating around during the day.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
PM Sent.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
2g head is gone. Thanks Steve!
Also think the 16g should be gone this weekend. Throw out some offers if you're interested in anything. I just want this stuff gone! |
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
how about $25 shipped for the NIB Pistons.
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
|
Re: FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff
Money Sent
|
| All times are GMT -5. The time now is 06:56 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.