Who does professional eprom socketing locallY?
 

Does anyone know anywhere that will put in a socket for a eprom chip locally?

Thanks
Aaron

Re: Who does professional eprom socketing locallY?
 

I know Shane has a guy that does it, give him a call.

Re: Who does professional eprom socketing locallY?
 

I had Steve from Wisconsin do it, he will give you a whole diagnostic check on your ecu as well, so more then worth the money

Re: Who does professional eprom socketing locallY?
 

^Any info on that guy?
Googling steve from WI isn't too helpful

Re: Who does professional eprom socketing locallY?
 

I can do it for you if you have the socket. In fact I may have one around. LMK!

Re: Who does professional eprom socketing locallY?
 

There's different kinds of sockets as well. Make sure whomever does it uses the correct socket. I don't remember which design is the correct version, but the "wrong" ones don't hold the eprom chip in there very well. I had an issue with that once and the DSMLINK guys changed out my crappy socket for the right one.

Just something to keep in mind...

Re: Who does professional eprom socketing locallY?
 

http://forum.widsm.org/member.php?17-steve

steve

Re: Who does professional eprom socketing locallY?
 

Heres some pics of your new soldered in ZIF Socket!

http://www.mitsustyle.com/photopost/...m/CIMG1194.JPG
http://www.dsmstyle.com/photopost/data/500/CIMG1194.JPG

http://www.mitsustyle.com/photopost/...m/CIMG1197.JPG
http://www.dsmstyle.com/photopost/data/500/CIMG1197.JPG

Re: Who does professional eprom socketing locallY?
 

OMGZ!!!!!!!!

it looks gorgeous, looks like we know where to take the $$$ to get some quality soldering done. I hope everything falls in line now.

Re: Who does professional eprom socketing locallY?
 

I had mine done by Rick Shindley way back in the day haha.

Re: Who does professional eprom socketing locallY?
 

Desoldering was the worst part. The chip was glued in there. I kept thiking I missed some solder because the chip wouldint budge.

Then I inserted the new socket and it wouldnt seat all the way as there was a small resistor in the way, so I made a little notch in the socket to clear it.

Btw how much was the ZIF socket?

Re: Who does professional eprom socketing locallY?
 

$10 from DB and $10 for the reprogrammable chip also from DB.

Thank you to both you and shane.

Re: Who does professional eprom socketing locallY?
 

Your welcome :bengals:

Re: Who does professional eprom socketing locallY?
 

Looks like we know who solders now. What program are you running turbotalon? DSMlink?

Re: Who does professional eprom socketing locallY?
 

Yes I run DSMlink.
Also Blkrosenova, I have a customer lined up for you.

Re: Who does professional eprom socketing locallY?
 

Oh, do tell!