1g panda part out
 

Been thinking about this for a while, and have decided to ditch the panda and move on to something different, if there's a enough interest. Car is a 1992 eclipse gsx, white/black top, 5spd. Has cloth black interior, is decently clean, but has some rust. I'll list the major items and if you need any small ones, just let me know what you need.

Good shifting trans (said to only have a couple thousand miles since being rebuilt, by the previous owner)-$225

Good 1g cylinder head/stock-$150

Nice black cloth seats, front and back-$100

Safc (blue faced model)-$100

Medium life act2600-$100

apexi n1 exhaust-$250 (or dp for $100, and catback for $175)

Walbro 255-$50

Transfer case-$100

4bolt rear-$150

16" rims, 2 good tires, 2 bad-$100

Lots more, just ask.

If you want the whole car, $make an offer, the bottom end is thought to be bad, but have never taken it apart to find out. The driver side window is busted out currently as well.

Let me know what you need! Call/text 651-468-6391

Thanks,
Dan.

If you would like to

Re: 1g panda part out
 

Forgot to add

2g exhaust manifold-$60

2g o2 housing w/ good o2 sensor-$35

Re-manufactured alternator, basically brand new-$60

Poly mounts (red) for engine and trans-$60

Hatch cover, not mint but good shape-$30

Stock struts (front good, back not so good, one blown) w/ eibach pro-kit springs-$120

Re: 1g panda part out
 

Does the transmission have a 22 or 23 spline output shaft?

Re: 1g panda part out
 

Haven't had a chance to take the trans off, it's an early 92, if I had to take a guess, I'd say 23 spline.

Re: 1g panda part out
 

Ok. I would too, but I've been surprised before. Consider me interested if you are going to part it out.

Re: 1g panda part out
 

I will be parting it out, big things like the tranny are the things I need to see interest in, before tearing it down. Let the part out begin!

Re: 1g panda part out
 

hey dan, i'd be interested in the struts sans the springs. Dunno if you're willing to part those.

Pictures of the wheels? Just wondering which ones they are.

Does the 4 bolt rear come with driveshaft? Or would you sell that separate? Does it make any noise?

I'd be interested in random other parts as well. Splash guards (if you have them) and maybe like trunk carpet.

Re: 1g panda part out
 

Yea paul the struts and springs are up for grabs.

Ill send you a pic.

And yes, you get the whole driveshaft, rear end unit. Didn't make any noise when I drove it.

Cars out in Afton, MN (by stillwater), so we could pick a day to meet out there and you could grab what you need.

Re: 1g panda part out
 

sorry, i said 'sans' which means (in some language, french?) WITHOUT the springs. Would you separate them?

Re: 1g panda part out
 

Bump, motor, trans, and poly mounts are pretty much spoken for. Going to start pulling it apart this week, so let me know what you need.

Also have working trunk struts! $25

Re: 1g panda part out
 

m looking for a set of rear brake calipers. whats your price or would you want to trade for anything in here?

http://www.mitsustyle.com/forums/showthread.php?t=26591

Re: 1g panda part out
 

Rears are junk, they were first on the list of things to replace when I got the car running again haha.