MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   The Parking Lot - On & Off Topic (http://www.mitsustyle.com/forums/forumdisplay.php?f=21)
-   -   35R powa mutha fuka!!! 9.1@160 (http://www.mitsustyle.com/forums/showthread.php?t=26814)

turbotalon1g 06-03-2010 02:45 PM
35R powa mutha fuka!!! 9.1@160
 
Curt Brown, 1994 Talon Tsi AWD Shep 5-speed, Tilton clutch, FP 3586HTA, 2.0 JE/Groden, 24.5x8x15 M&H slicks, ethanol

Norwalk may 30 2010
60 1.41
330 3.98
1/8 6.017
mph 123.64
1/4 9.105
mph 160.31


so if you want to complain about the time, maybe you can try to match the speed with these sick ass ginormous turbos.

Congrats Mr. CB :drive1:

Matt D. 06-03-2010 02:52 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Didn't Curt have an auto car, or am I thinking of someone else?

scheides 06-03-2010 02:53 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Goddamn it's nuts what this turbo can do. Low 9's seem to be on obtainable goal now. Crazy cool!

Goat Blower 06-03-2010 03:02 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Quote:
Originally Posted by scheides (Post 342902)
Goddamn it's nuts what this turbo can do. Low 9's seem to be on obtainable goal now. Crazy cool!
Well, that means it's capable of a 9.6, subtract a half second for Curt.

Matt D. 06-03-2010 03:07 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
His low 9s runs at 159mph from last year's shootout.


http://www.youtube.com/watch?v=xldEtj8AJzs&hd=1

Shane@DBPerformance 06-03-2010 03:07 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Then add in half a second for the tracks around here, and another half second for typical suspension setups, and another half second for typical brake, alignment, tire, wheel bearing setups, weight, and another half second for most people driving ability and you got 11.6. Sounds about right. :)

Kracka 06-03-2010 03:09 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Quote:
Originally Posted by ecoli (Post 342911)
Then add in half a second for the tracks around here, and another half second for typical suspension setups, and another half second for typical brake, alignment, tire, wheel bearing setups, and another half second for most people driving ability and you got 11.6. Sounds about right. :)
This. A lot easier said than done.

tpunx99GSX 06-03-2010 03:28 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Curt Brown Mod FTW.

C3L1CA 06-03-2010 03:30 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
Does he shift into 5th or just rev the piss out of it in 4th? That thing is moving

Goat Blower 06-03-2010 06:52 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
I'm sure he stays in fourth, his redline is up there.

Shane@DBPerformance 06-03-2010 07:38 PM
Re: 35R powa mutha fuka!!! 9.1@160
 
None on the fast AWD DSMs have to go into 5th, you just rev it higher. Curt used to say you shouldn't need bigger than 24.5" slicks either, if you can't rev it high enough in 4th to get through the traps with 24.5" slicks, then you need to build a better motor.

C3L1CA 06-04-2010 09:11 AM
Re: 35R powa mutha fuka!!! 9.1@160
 
haha apparently I need to build me a better motor.

turbotalon1g 06-04-2010 11:27 AM
Re: 35R powa mutha fuka!!! 9.1@160
 
Quote:
Originally Posted by ecoli (Post 342911)
Then add in half a second for the tracks around here, and another half second for typical suspension setups, and another half second for typical brake, alignment, tire, wheel bearing setups, weight, and another half second for most people driving ability and you got 11.6. Sounds about right. :)
This. :sport017:

Posts like this make me happy, actually I think everyone that has posted in here so far knows whats up.

Matt D. he is still on a 5 spd. shep 4

Brad you just need more nitrous.


All times are GMT -5. The time now is 02:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.