MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Mitsu vehicle parts for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=78)
-   -   Garage clean out (http://www.mitsustyle.com/forums/showthread.php?t=26528)

Pushit2.0 05-07-2010 12:15 AM

Garage clean out
 
Everything is now OBO, no reasonable offer turned down.

I am trying to weed out a little, so I can finish my Galant build some time this decade. Here is a list and some pictures of items I would like to sell. Prices as marked, or best offer. I prefer cash in hand, but I do have Paypal.

PM or email me if you want to buy something: GalantVR41062@yahoo.com

Here are the pictures and I will update or add stuff as needed.

http://www.mitsustyle.com/photopost/...icture_008.jpg

http://www.mitsustyle.com/photopost/...icture_011.jpg

http://www.mitsustyle.com/photopost/...icture_012.jpg

http://www.mitsustyle.com/photopost/...icture_010.jpg

http://www.mitsustyle.com/photopost/...icture_009.jpg



This is the for sale list:

C-16 race gas, I have 25 gallons this has been sealed and purged with argon if gas was removed. $10 a gallon or $200 for the 25 gallons and the barrel obo

Eagle 5900 MBB rods with JE 81MD4 pistons, 1 rod spun a bearing, the main bearings were in upside down thus no oil to the rods, and they are missing 3 rod bolts. ::: sold ::::

8 ARP 2000 Eagle 1.5 rod bolts, new from ARP. $40 obo

6 mild steel laser cut T4 turbo flanges. Brand new from PTE. $20 each or $100 for all 6 obo

5 t4 steel turbo gaskets $5 each or $20 for all 5 obo

1 T3 steel turbo gasket $5 obo :::SOLD::::

3 laser cut stainless steel 7cm mitsubishi turbo gaskets $20 each 2 left ::: 1 sold ::::

5 7cm factory turbo gaskets $10 each or $40 for all 5 obo ::: 2 sold :::

1 stainless steel stamped mitsu bolt on turbo to o2 housing gaskets $20 each obo

1 stock evo manifold to turbo and turbo to o2 housing gasket set $10 obo

I have a box full of 1/2" thick stainless steel mitsu bolt on O2 housing flanges a little clean up work and holes drilled is all they need. $20 each or the hole box for $260 obo

Car quest ps belt 9265 $5 obo

stock 3s throttle body minus TPS sensor $20 obo

brand new in box MSD tack adapter part number 8912 $60 obo

Stewart Warner 2 1/16" black face 30/40 boost gauge, used $20 obo

Stewart Warner 2 5/8" white face tranny temp gauge brand new in box $40 obo

Stewart Warner 2 5/8" black face 30/40 boost gauge brand new in box $40 obo ::: Sold ::::

various NGK iridium spark plugs for a 3/s or dsm/evo and 1 set for a neon $5 each obo

universal aluminum shift nob $10 obo

stock dsm coils I have 3 good sets and 1 missing a plug $20 each obo

2g mas missing the lower middle honey comb $40 obo ::: on loan::::

2g speedo gear/sensor $40 obo :::: SOLD ::::

longer clutch slave cylinder rods 3.650" in length the bag is marked FWD $5 each or the $40 for the hole bag (15)

the never ending pile of unmentionable blue EGR block off plates with socket head cap screws.... ::: sold ::: 1 to Hill and the others go down range :p

Blue Greddy type RS thread in nozzel $10 obo

SSQ stainless steel weld on flange $10 obo

Brand new ZEX nitrous fill station w/ stand for gravity feed tank $600 obo :::: SOLD ::::

Red Line engine race oil I have 1 case of 40wt race engine oil $10 a quart or $100 for 1 case

1g dsm 1 3/4" .125" wall mild steel DOM main hoop $140 obo

BHJ 2.0 torque plate, used w/ box and chrome moly spacers $140 obo

BHJ 2.4 torque plate, slightly used and good up to a 2.7 hybrid 4g engine $140 obo

1g awd starter w/o cables $20 each

K sport adjuster's and 1 spanner wrench $20 obo

garrett wastegate actuator, universal fit $40 obo

New items for sale:

sparco universal seat slide brackets, they look just like these http://www.amazon.com/Sparco-00493-T.../dp/B000ECJ17M I have 2 sets $50 each or $80 for the pair obo

1g dsm copper radiator, its a little beat up but no corrosion or leaks $40 obo

10 turned down balance shafts for the 4g63 engine. The shafts look just like this http://www.cimotorsports.net/motor-s...-kit-4g63.html $80 each obo ::: 2 SOLD ::::

ThEwAy2b 05-07-2010 12:52 PM

Re: Garage clean out
 
Even though its not on the list, you by chance have a 16g oil return would ya?

Goat Blower 05-07-2010 02:37 PM

Re: Garage clean out
 
I'll take a 7cm gasket and one of those sweet EGR block off plates. :)

The 92 Laser 05-07-2010 08:13 PM

Re: Garage clean out
 
PM sent

sleepydsm 05-07-2010 09:01 PM

Re: Garage clean out
 
OMFG ULTRA RARE USDM QPR EGR BLOCK OFF PLATES *drool*

RAPTOR!!!!!!!!!!!!!!!!!!!!!

turbotalon1g 05-07-2010 10:37 PM

Re: Garage clean out
 
Hey i will stop by tomorrow with nick to grab a 7cm, big boost gauge and maybe some other small stuff.

AJ 05-07-2010 11:55 PM

Re: Garage clean out
 
Quote:

Originally Posted by Pushit2.0 (Post 338593)
the never ending pile of unmentionable blue EGR block off plates with socket head cap screws.... $1 each or $20 for the lot (22)

Save the one for Steve, I can swing up and give cash for the rest ($20) this weekend or next week sometime if it work.

I want them, and may just post photos of how I use them. There is a Smith & Wesson Model 29 revolver with bad aim and even worse recoil waiting for these.

NO BS, I want.

Kevin 1G Drummer 05-08-2010 12:12 AM

Re: Garage clean out
 
I'll take the t3 gasket, but I won't be able to pick it up till Tuesday at the earliest

Powers 05-08-2010 12:13 AM

Re: Garage clean out
 
ill take rods/pistons goona need shipped or if your goin to dyno day possibly pick them up there

Pushit2.0 05-08-2010 11:32 AM

Re: Garage clean out
 
Up dates and replied to all. Thanks for looking.

~John

turbotalon1g 05-08-2010 11:55 AM

Re: Garage clean out
 
I would like to get one of those EGR blockoffs, i thought I had one but i don't.

justinhill 05-08-2010 12:16 PM

Re: Garage clean out
 
Pm sent

Pushit2.0 05-08-2010 09:54 PM

Re: Garage clean out
 
updated.

Pushit2.0 05-09-2010 11:49 AM

Re: Garage clean out
 
New items added.

n8kerns 05-09-2010 09:57 PM

Re: Garage clean out
 
Just so you know, you linked the sparco seat thing again where the turned down balance shafts where suppose to be.

Pushit2.0 05-09-2010 11:08 PM

Re: Garage clean out
 
Link fixed.

Pushit2.0 05-18-2010 01:20 AM

Re: Garage clean out
 
Everything is OBO, these parts have to go.

Goat Blower 05-18-2010 11:08 AM

Re: Garage clean out
 
John, how about $60 for one of those BS eliminators? I've changed my mind on trying one of those.

Pushit2.0 05-18-2010 01:27 PM

Re: Garage clean out
 
pm sent

niterydr 05-20-2010 06:18 PM

Re: Garage clean out
 
Quote:

Originally Posted by AJ (Post 338828)
Save the one for Steve, I can swing up and give cash for the rest ($20) this weekend or next week sometime if it work.

I want them, and may just post photos of how I use them. There is a Smith & Wesson Model 29 revolver with bad aim and even worse recoil waiting for these.

NO BS, I want.

Can I come when you do this?


All times are GMT -5. The time now is 12:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.