|
MAPerformance's Drag Evo Build
We had this build thread going on EvoM already, but thought we should keep our locals in the loop as well. Here we go....
http://maperformance.com/marketing/mapuu.jpg At MAPerformance we have big plans for the 2010 race season :) We have acquired an Evo 8 chassis that will be used to showcase our abilities with the platform. Needless to say, we are out to break some records ;) Don't forget to subscribe to this thread so you can follow our progress. Disassembly has already started, body panels have been sent off for paint, and the machine work for the engine has already started. As always fabrication, machine work, and assembly will be done in house. http://www.maperformance.com/marketing/evo1.jpg http://www.maperformance.com/marketing/evo2.jpg Looking for Evolution VIII/IX performance parts? Be sure to check out the product offerings from our project sponsors below and as always contact us for unbeatable pricing! Thank you to all our sponsors, this wouldn't be possible without you! http://maperformance.com/marketing/acllogo.jpg http://maperformance.com/marketing/aemlogo.jpg http://maperformance.com/marketing/compturbologo.jpg http://maperformance.com/marketing/etslogo.jpg http://maperformance.com/marketing/ficlogo.jpg http://maperformance.com/marketing/fidanzalogo.jpg http://maperformance.com/marketing/gsclogo.jpg http://maperformance.com/marketing/howardscamslogo.jpg http://maperformance.com/marketing/magnuslogo.jpg http://maperformance.com/marketing/mishimotologo.jpg http://maperformance.com/marketing/brucetituslogo.jpg http://maperformance.com/marketing/sparktechlogo.jpg http://maperformance.com/marketing/t...lutionlogo.jpg http://maperformance.com/marketing/wisecologo.jpg |
Re: MAPerformance's Drag Evo Build
The parts are starting to arrive... http://www.maperformance.com/marketing/howardrods.jpg If you're interested in any Howard Cams products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
And here they come... http://www.maperformance.com/marketing/aemcdi.jpg If you're interested in any AEM products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
More, more, more... http://www.maperformance.com/marketing/tsmounts.jpg If you're interested in any Torque Solution products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
http://www.maperformance.com/marketing/aclbearings.jpg http://www.maperformance.com/marketing/acllogo.jpg If you're interested in any ACL products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
http://www.maperformance.com/marketi...ecopistons.jpg http://img389.imageshack.us/img389/9971/wiseco.jpg If you're interested in any Wiseco products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
http://www.maperformance.com/marketing/mishimotorad.jpg http://img718.imageshack.us/img718/8...himotologo.jpg If you're interested in any Mishimoto products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
Well to go along with the Mishimoto radiator that we posted pictures up of a little bit ago we have started fabrication on our radiator placement. We have decided that we would like to mount our radiator in the location of the factory a/c condenser. Here are some pics of the front end, and some pics as it's getting cut into.
What it used to look like... http://www.maperformance.com/marketing/evofront1.jpg http://www.maperformance.com/marketing/evofront2.jpg And now... http://www.maperformance.com/marketing/evofront3.jpg http://www.maperformance.com/marketing/evofront4.jpg http://www.maperformance.com/marketing/evofront6.jpg More to come... |
Re: MAPerformance's Drag Evo Build
|
Re: MAPerformance's Drag Evo Build
http://www.maperformance.com/marketing/2150.jpg http://www.maperformance.com/marketing/ficlogo.jpg If you're interested in any FIC products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
Quote:
|
Re: MAPerformance's Drag Evo Build
One of the things we have been waiting on is to get some parts back from paint, so we can get everything mocked up, trimmed and in place on the front end. Parts came back from paint yesterday, so it's time to make some progress.
Shaved corner markers... http://www.maperformance.com/marketing/evo20.jpg Evo 9 front bumper... http://www.maperformance.com/marketing/evo21.jpg Shaved trunk... http://www.maperformance.com/marketing/evo22.jpg |
Re: MAPerformance's Drag Evo Build
http://www.maperformance.com/marketing/magnus1.jpg http://www.maperformance.com/marketing/magnus2.jpg http://www.maperformance.com/marketing/magnuslogo.jpg If you're interested in any Magnus products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
Final fabrication of radiator, and intercooler mounts was taken care of last night. Here are a couple of shots with the bumper on and off. The core sure fills the bumper nicely ;) http://www.maperformance.com/marketing/evo30.jpg http://www.maperformance.com/marketing/evo35.jpg http://www.maperformance.com/marketing/evo31.jpg http://www.maperformance.com/marketing/evo32.jpg http://www.maperformance.com/marketing/evo33.jpg http://www.maperformance.com/marketing/evo34.jpg |
Re: MAPerformance's Drag Evo Build
Haha, ok fine... I use the term "final fabrication" lightly because Kyle comes up with new ideas all the time. Here are some pictures of the intercooler with ALL mounting points on. The bottom has tabs that go back to, and bolt onto the rounded piping you see. Also, we've added the mounting points on the side as well.
|
Re: MAPerformance's Drag Evo Build
OEM Goodness... http://www.maperformance.com/marketing/evo50.jpg http://www.maperformance.com/marketing/evo51.jpg http://www.maperformance.com/marketi...etituslogo.jpg If you're interested in any OEM Mitsubishi products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
Here are some pictures of some of the fab work that has taken place in the last couple of days. Kyle mocked up our manifold, and intercooler piping today. It's starting to come together. |
Re: MAPerformance's Drag Evo Build
Marty from Turbosmart pulled through with the next pieces to the puzzle. Thanks again Marty!!! http://www.maperformance.com/marketing/turbosmart1.jpg http://www.maperformance.com/marketing/turbosmart2.jpg http://www.maperformance.com/marketing/turbosmart3.jpg http://www.maperformance.com/marketi...osmartlogo.jpg If you're interested in any beautiful Turbosmart products for your build, please PM us for unbeatable pricing! |
Re: MAPerformance's Drag Evo Build
Funny you should ask....This thing is a work of art. http://www.maperformance.com/marketing/evo130.jpg http://www.maperformance.com/marketing/evo131.jpg http://www.maperformance.com/marketi...rktechlogo.jpg If you're interested in any SparkTech products for your build, please PM us for unbeatable pricing! |
| All times are GMT -5. The time now is 08:35 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.