MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   How to check a head for warp (http://www.mitsustyle.com/forums/showthread.php?t=26054)

BogusSVO 03-26-2010 11:40 AM
How to check a head for warp
 
How to check a head for warp.
The first thing to do is remove all carbon and old gasket material.
Then with a machinist straight edge, Check all 8 positions.
If .003 can be fit under the straight edge, the head needs to be resurfaced.
Also Note the fire ring grooves from the head gasket, if the head has these, and checks flat. The head needs to be resurfaced.
First position.
Links to the other 7 positions.


All times are GMT -5. The time now is 02:02 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.