MitsuStyle - Transmission assembly goop suggestions?

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)

- - Transmission assembly goop suggestions? (http://www.mitsustyle.com/forums/showthread.php?t=25682)

CarPsyco84

02-17-2010 05:10 PM

Transmission assembly goop suggestions?

So what do you guys that build transmissions use when you reassemble the case to keep it from leaking all over the place, I thought about using black RTV but figured that might not work that well on a actual flat surface... Any Idea's?

Jungy

02-17-2010 05:37 PM

Re: Transmission assembly goop suggestions?

the red sealant thats used between aluminum on transmissions is called anaerobic sealant.

CarPsyco84

02-17-2010 05:55 PM

Re: Transmission assembly goop suggestions?

Thanx, I knew there was something other than RTV, that worked better.

turbotalon1g

02-17-2010 06:15 PM

Re: Transmission assembly goop suggestions?

Gray RTV works good, Jack from Jack's transmission says that its good to use.

At-Least-It's-An-Evo

02-18-2010 08:02 AM

Re: Transmission assembly goop suggestions?

I've used a those high temp RTVs on the end cases wayyy back in the day when we had to swap viscous couplers out on them awd carzzz! Never had one leak.

Halon

02-18-2010 09:04 AM

Re: Transmission assembly goop suggestions?

Quote:

Originally Posted by turbotalon1g (Post 325205)

Gray RTV .

Bingo.

niterydr

02-18-2010 09:53 AM

Re: Transmission assembly goop suggestions?

I've also used Gray RTV with good success in the 20+ something dsm transmission I've rebuilt over the years.

All times are GMT -5. The time now is 10:07 AM.