MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)
-   -   Want to buy brakes and hubs (http://www.mitsustyle.com/forums/showthread.php?t=25503)

Andrew7dg 01-27-2010 08:55 AM

Want to buy brakes and hubs
 
Just seeing what people have before I have to go to the U pull yard

Looking for
DSM
Front Hubs
Front Brake rotors
Front Brake calipers with hangers (big brakes if possible)

Rear hubs off of a FWD DSM
Rear brake rotors
Rear brake calipers with hanger

And by a slim chance does anyone have 4g csm Knuckle assembly

TurboDomestics 01-27-2010 10:40 AM

Re: Want to buy brakes and hubs
 
1g or 2g? IM assuming 1g, but if you need 2g stuff PM me. Ive got all of that.

Andrew7dg 01-27-2010 03:06 PM

Re: Want to buy brakes and hubs
 
1g stuff


Note
I have the 4g knuckle assembly now

Still looking for other stuff

awd-drifter 01-27-2010 03:25 PM

Re: Want to buy brakes and hubs
 
i went to U Pull in Rosemount about a week ago and there was a 1g GSX there. When I was there, the trans, turbo, im, ic piping and most of the interior was gone. other than that, the rotors, calipers were still there.

TkrPerformance 01-27-2010 04:23 PM

Re: Want to buy brakes and hubs
 
if you want to run disks on the back of the csm you will need the 3g csm set up 1g parts dont work with a ton of welding and custom fab.

Andrew7dg 01-27-2010 05:45 PM

Re: Want to buy brakes and hubs
 
Quote:

Originally Posted by TkrPerformance (Post 321809)
if you want to run disks on the back of the csm you will need the 3g csm set up 1g parts dont work with a ton of welding and custom fab.

Yeah just found this out...

Found a place to order the 3g sedan hubs though.

However can you use the brake setup from a 1g? AWD or FWD?

TkrPerformance 01-27-2010 05:51 PM

Re: Want to buy brakes and hubs
 
you can use the dsm rotors and calapers fwd
but you will need the csm 3g disk brake brackets with out them you cant swap it over

Halon 01-27-2010 06:02 PM

Re: Want to buy brakes and hubs
 
Damn just last week I finally threw away my whole front brake setup since I did the cobra upgrade. You're a week too late!!!

Andrew7dg 01-28-2010 10:36 AM

Re: Want to buy brakes and hubs
 
Quote:

Originally Posted by TkrPerformance (Post 321815)
you can use the dsm rotors and calapers fwd
but you will need the csm 3g disk brake brackets with out them you cant swap it over

Do you mean the hanger for the caliper or the bracket that holds the hanger?

89Mirageman will make a set of bracket to bracket to convert drums into disk. Or I will have to find a set from a mirage gt

http://i190.photobucket.com/albums/z...Picture653.jpg

which are sort of rare... to find. Mitsubishi doesn't make one anymore.
Unless you feel like fabricating some up?

Quote:

Originally Posted by Halon (Post 321816)
Damn just last week I finally threw away my whole front brake setup since I did the cobra upgrade. You're a week too late!!!

NOO!!!!.... o well...
Someone else must have a set laying around from an upgrade. It is cold right now and I don't really want to go to u pull just yet. :beach:


All times are GMT -5. The time now is 05:24 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.