MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Help!!! (http://www.mitsustyle.com/forums/showthread.php?t=25267)

Powers 12-28-2009 03:05 PM

Help!!!
 
ok so i was on the highway and i watched my oil pressure gauge drop and the motor sputtered and died. it still cranks over and everything but wont start there was a wire unhooked from the oil filter housing not sure where it connects to but any ideas please let me know im guessing bent valves?

Matt D. 12-28-2009 03:10 PM

Re: Help!!!
 
If the motor dies so will your oil pressure. Check for fuel and spark, do a compression test, etc.

Powers 12-28-2009 03:54 PM

Re: Help!!!
 
lost oil pressure and drove off the highway so like 3 mins of no oil pressure before it died

TkrPerformance 12-28-2009 04:09 PM

Re: Help!!!
 
No oil press will toast the bottom end really fast

Powers 12-28-2009 09:53 PM

Re: Help!!!
 
planned on doin a comp test tonight but i cant find my comp tester so gotta wait till tomorrow

Kracka 12-28-2009 09:57 PM

Re: Help!!!
 
You lost oil pressure and continued driving for 3 mins? When oil pressure drops you need to shut off the engine immediately if you want any chance of it surviving.

Constant_Project21 12-28-2009 10:11 PM

Re: Help!!!
 
If the wire that goes to the filter housing, is the one that actually reads oil pressure, then it will say it doesn't have any if not connected....could be a coincidence that it won't start, or your motor could be toast.

twack 12-28-2009 10:12 PM

Re: Help!!!
 
Quote:

Originally Posted by alliance14 (Post 317431)
there was a wire unhooked from the oil filter housing guessing bent valves?

unless this constantly happens and you dont believe in the stocker at all.

scheides 12-28-2009 10:14 PM

Re: Help!!!
 
Quote:

Originally Posted by twack (Post 317476)
unless this constantly happens and you dont believe in the stocker at all.

Yup, especially if it gets oily, that little wire can even be hooked up and not get a solid reading up to the factory gauge.

Kracka 12-28-2009 10:22 PM

Re: Help!!!
 
I assumed you were using an aftermarket gauge. The stock gauge is pretty much worthless, the low oil pressure warning light is generally pretty trusty though.

twack 12-28-2009 10:49 PM

Re: Help!!!
 
last i saw the car it didnt have an aftermarket gauge

Powers 12-28-2009 10:54 PM

Re: Help!!!
 
its a stock gauge and the gauge always bounced around and was never accurate so i didnt really pay attention to it when it just dropped completely but then the actual oil light came on then it crapped out.

Matt D. 12-28-2009 11:05 PM

Re: Help!!!
 
I don't know what you're expecting us to tell you. You KNEW there was a problem with the car, no oil pressure, yet you continued to drive it. Good luck.

Powers 12-28-2009 11:06 PM

Re: Help!!!
 
i really didnt know cuz the gauge was effed up so i really didnt know it was a problem i just assumed the gauge was acting up so i just need to get some aftermarket gauges after its fixed

scheides 12-28-2009 11:08 PM

Re: Help!!!
 
Quote:

Originally Posted by Matt D. (Post 317483)
I don't know what you're expecting us to tell you. You KNEW there was a problem with the car, no oil pressure, yet you continued to drive it. Good luck.

Tough love mattd, tough love. Let us know how the compression/leakdown tests go.

Kevin 1G Drummer 12-28-2009 11:26 PM

Re: Help!!!
 
Uhh, yeah... If you drove for 3 mins with the oil light on, your bottom end is toast. Any loud rattling, clanging or banging when the motor sputtered out and died?

viridionplague 12-29-2009 12:29 AM

Re: Help!!!
 
Quote:

Originally Posted by Matt D. (Post 317483)
I don't know what you're expecting us to tell you. You KNEW there was a problem with the car, no oil pressure, yet you continued to drive it. Good luck.


im inclined to agree with matt here, just assuming its a faulty guage is a bad idea, cause what if your wrong? and in this case it appears you were.

although i do with you the best of luck in getting whatever the issue bmay be resolved

Powers 12-29-2009 12:45 AM

Re: Help!!!
 
the best way for me to describe how it died would be the exact noise a car makes when your trying to teach someone how to drive a stick and they just pop the clutch and it dies it still turns over and everything nothing is knocking or clicking when it turns over

Constant_Project21 12-29-2009 03:21 AM

Re: Help!!!
 
Do your cam gears move when turning it over?

blackrosenova400 12-29-2009 03:46 AM

Re: Help!!!
 
This is your piston

http://www.saturnsurplus.com/genset/5piston.jpg






















This is your piston with no oil

http://www.billzilla.org/meltedpiston.jpg


All times are GMT -5. The time now is 01:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.