WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

I am looking to upgrade from my small 16g. I would like a bolt on turbo. Something 50trim or bigger in size. If it's not a bolt on turbo but you have a manifold and lines to go with it, that would be fine. As long as I can just bolt it all on and be good to go. Not looking to piece together a kit. My budget is around 500-600 max. Let me know what you have! Thanks

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

pm'd

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

Still looking!

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

I still have my bolt-on BB gt3076. $550 for the turbo and FP restrictor.

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

^ Why so cheap?

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

I will keep that in mind, but I'm looking for something more complete.

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

what do you mean by "more complete"?

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

I need something that will bolt right on as a complete kit. (Wastegate, feed and return lines, ect..)

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

All you would need is an o2 housing that has a provision for an external wastegate. Stock lines will bolt right to the center section.

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

I have a 40mm gate that would work with kevins turbo and would be one less part

Re: WTB: Bolt-on mitsu turbo: 50trim, 20g or bigger!
 

Hmm.. Very tempting. I'll have to get back to both of you on that.