MitsuStyle - Idle air controll motor

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)

- - Idle air controll motor (http://www.mitsustyle.com/forums/showthread.php?t=25143)

Alpha D

12-09-2009 05:27 PM

Idle air controll motor

As it is getting colder and colder my car wont start or stay running do to the fact the idle air control motor has been deleted. So i am in need for a New or used motor for a 1991 eagle talon tsi awd Turbo ^_^

Please send me PM. I need one as soon as possible

93gtpeater

12-09-2009 06:00 PM

Re: Idle air controll motor

Pm sent

goodhart

12-09-2009 11:14 PM

Re: Idle air controll motor

Have you tried adjusting the Base Idle Set Screw ?

niterydr

12-09-2009 11:18 PM

Re: Idle air controll motor

Quote:

Originally Posted by goodhart (Post 315801)

Have you tried adjusting the Base Idle Set Screw ?

This. The BISS can be adjusted to allow a cracking of the throttle plate. This will allow you to get more air in for cold starts, but be advised it will raise your baseline idle, which can prove to be annoying to some.

Best bet is to get in a working IAC and make sure you BISS o-ring is good without leaks.

Alpha D

12-10-2009 12:28 AM

Re: Idle air controll motor

Thanks Everyone. For the advise again. I figured adjusting the screw slightly for a higher idle at around 1500-1700. Close to guaranteeing a start up. Install the IAC and hope it will help in keeping the motor running.

Alpha D

12-10-2009 12:56 AM

Re: Idle air controll motor

PM Replied.

All times are GMT -5. The time now is 03:44 AM.