MitsuStyle - 1gb shift lever

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)

- - 1gb shift lever (http://www.mitsustyle.com/forums/showthread.php?t=25018)

jto92tsi

11-23-2009 12:05 PM

1gb shift lever

I need the lower shift lever for a 1gb. Then I hope my talon will move lol.

At-Least-It's-An-Evo

11-23-2009 01:27 PM

Re: 1gb shift lever

The lever on the tranny? or the shifter itself? What is a shift lever and why is it 1gb specific? I have a short shifter... and some shifter cables from a 93.

jto92tsi

11-23-2009 01:41 PM

Re: 1gb shift lever

Just the lower lever on the trans. I have a 92tsi awd with a 90 trans. Mark told me that if I swich the levers with a 1gb it will work. I hope it does I don't want pull the trans again.

Goat Blower

11-23-2009 04:13 PM

Re: 1gb shift lever

You have to take the case apart to swap arms, it's much easier to swap cables and shifter assy.

jto92tsi

11-23-2009 04:39 PM

Re: 1gb shift lever

It not hard to take it off. There is a tapered pin holding it on. You just have to make sure you pound on the small end of the pin.

At-Least-It's-An-Evo

11-23-2009 08:14 PM

Re: 1gb shift lever

Quote:

Originally Posted by Goat Blower (Post 314185)

You have to take the case apart to swap arms, it's much easier to swap cables and shifter assy.

I thought so too but if he knows another way, more power to him. Good luck with it. I've also seen other people drill a hole in the arm to make it 100% perfectly straight or whatever exactly needs to be done.

All times are GMT -5. The time now is 02:52 PM.