MitsuStyle - Tuning Question

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)

- - Tuning Question (http://www.mitsustyle.com/forums/showthread.php?t=2497)

slowbubblecar

04-11-2004 11:23 AM

I used the g-tec the other day to log a run and get hp data also. I noticed my max hp and torque were at 5500 and they both dropped way down the rest of the way until I shifted at 7500. Anybody know why it would drop so much?
James

slowbubblecar

04-11-2004 11:31 AM

BTW, the hp and torque droped around 75 from what it was at 5500rpm

Shane@DBPerformance

04-11-2004 11:32 AM

Maybe because you don't have a big turbo, cams and sheetmetal intake manifold? Thats the only way your going to get a DSM to hold power out to 7500.

slowbubblecar

04-11-2004 11:34 AM

Quote:

Originally posted by ecoli@Apr 11 2004, 10:32 AM
Maybe because you don't have a big turbo, cams and sheetmetal intake manifold? Thats the only way your going to get a DSM to hold power out to 7500.

I have a super 20g. The one you had then sold to Barton. ;) I'd think it would be able to pull to 6500.

At-Least-It's-An-Evo

04-11-2004 11:36 AM

Quote:

Originally posted by ecoli+Apr 11 2004, 10:32 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (ecoli @ Apr 11 2004, 10:32 AM)</td></tr><tr><td id='QUOTE'>Maybe because you don't have a big turbo, cams and sheetmetal intake manifold?* Thats the only way your going to get a DSM to hold power out to 7500.[/b]

:secret: :liar: :stupid: :blah: jk :toast:

<!--QuoteBegin-ghettostyle@ blah blah,
I have a super 20g. The one you had then sold to Barton.  I'd think it would be able to pull to 6500.[/quote]

Without cams and a sheetmetal, it sitll isn't going to pull past that.

All times are GMT -5. The time now is 09:15 AM.