bolts that hold pp onto flywheel
 

i was wondering if they had specs on these? i dont kno where mine went and need to find them. any help on where i can buy them? or specs on them.

Re: bolts that hold pp onto flywheel
 

on a 1g 6 bolt

Re: bolts that hold pp onto flywheel
 

check vfaq. i think they have an article on that. otherwise call a dealer he can look it up for you on alldata.

Re: bolts that hold pp onto flywheel
 

I have extra sets of them

Re: bolts that hold pp onto flywheel
 

It is a M8 x 1.25 bolt that is about 1/2" long and stamped with a number 7 on the head and a lock washer. Hard ware stores normally sell bolts that will work, grade 8 is ideal and they normally have a 13mm size head vs the 12mm factor head on the bolt. I would use a little lock tight and torque the bolt to 18lb/ft.

~John