MitsuStyle - Turbo rebuilding

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)

- - Turbo rebuilding (http://www.mitsustyle.com/forums/showthread.php?t=23876)

mike55112

07-25-2009 01:40 PM

Turbo rebuilding

I have a precision sc61 turbocharger that needs a rebuild. It was in a car that spun a rod bearing and was driven for a week after it spun the bearing. I have the center section off and I want to bring it in for a rebuild. First I would like to know if anyone could give me an estimate on a rebuild, it might need a new compressor wheel cause its chipped up a bit. What are some good places for bringing a turbo to be rebuilt.

Constant_Project21

07-25-2009 05:26 PM

Re: Turbo rebuilding

Pm jhaan_dude, he seems to know what's up when it comes to rebuilding costs.

Kevin 1G Drummer

07-25-2009 05:42 PM

Re: Turbo rebuilding

Diesel Components seems to be a place alot of locals have gone. There's also a diesel place in Blaine just off Central that rebuilds turbos, but I'm not sure what it's called.

GsXtUrBo98

07-25-2009 07:48 PM

Re: Turbo rebuilding

I know a place mike.

95talonracer

07-25-2009 07:55 PM

Re: Turbo rebuilding

Quote:

Originally Posted by Constant_Project21 (Post 298693)

Pm jhaan_dude, he seems to know what's up when it comes to rebuilding costs.

Just go right to where the work is done which is Diesel Components. I would say buy a new center section with both new wheels.

Constant_Project21

07-25-2009 08:32 PM

Re: Turbo rebuilding

Well julian rebuilds them, and has them brought to diesel components for balancing. Could save some money, and have your turbo warrentied by going through Julian.

Mwolf83

07-25-2009 09:19 PM

Re: Turbo rebuilding

I have the same turbo and I spun a rod bearing as well, not wheel damage though. Anyways I sent it back to Precision for a rebuild and balance, they are charging me $360....Holy F*ck! So I'd prolly find somewhere else to send it.

95talonracer

07-26-2009 12:32 PM

Re: Turbo rebuilding

Quality is key so send it right to Precision! Why save money to have warranty and the hassle of yanking the turbo back out when it fails again? Mike send it to PTE

mike55112

07-26-2009 07:08 PM

Re: Turbo rebuilding

I will probably just end up buying a brand new center section. Not taking a chance with anyone on here that doesnt have any real training rebuilding a turbo.

jhaan_dude

07-26-2009 09:15 PM

Re: Turbo rebuilding

i have a brand new center section, is your turbo a t3 or mitsu? if so i have a brand new never been used and wheels for you. brand new...

95talonracer

07-26-2009 11:01 PM

Re: Turbo rebuilding

Get a BB center section, Precisions BB sections seem to be much better then their journal by what I have seen.

mike55112

07-27-2009 12:03 AM

Re: Turbo rebuilding

Quote:

Originally Posted by jhaan_dude (Post 298763)

i have a brand new center section, is your turbo a t3 or mitsu? if so i have a brand new never been used and wheels for you. brand new...

I have the t3. What do you want for it?

jhaan_dude

07-27-2009 03:12 AM

Re: Turbo rebuilding

send me a pm

All times are GMT -5. The time now is 06:16 AM.