MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)
-   -   WTB: 1G Driver's Side Motor Mount (http://www.mitsustyle.com/forums/showthread.php?t=23637)

Shane@DBPerformance 06-29-2009 12:15 PM

WTB: 1G Driver's Side Motor Mount
 
I need the driver's side motor mount for a 1G DSM. The rubber crap is destroyed on the one for my wife's Talon.

Constant_Project21 06-29-2009 12:17 PM

Re: WTB: 1G Driver's Side Motor Mount
 
Do you need the entire mount? I have one still on the car that I can pull off for ya.

Shane@DBPerformance 06-29-2009 12:19 PM

Re: WTB: 1G Driver's Side Motor Mount
 
I don't need the part the part that directly bolts to the block and goes under the timing cover, just the easy to remove part.

Constant_Project21 06-29-2009 12:21 PM

Re: WTB: 1G Driver's Side Motor Mount
 
Hmm, trying to remember if mine is gone or not, should still be there. I'd have to check. When do you need it by?

Shane@DBPerformance 06-29-2009 12:22 PM

Re: WTB: 1G Driver's Side Motor Mount
 
ASAP, I want to drop the motor back in it. But I can drop it in with the old busted one and swap it after easy.

Constant_Project21 06-29-2009 12:23 PM

Re: WTB: 1G Driver's Side Motor Mount
 
Ill go over and check, what do they go for? And am I going to be dropping this off at db?

Shane@DBPerformance 06-29-2009 12:30 PM

Re: WTB: 1G Driver's Side Motor Mount
 
I don't know what they go for. If you want to drop it off, or I can try to meet you sometime near Roseville.

Constant_Project21 06-29-2009 12:35 PM

Re: WTB: 1G Driver's Side Motor Mount
 
Well throw out whatever ya feel necessary. Db is a little bit of a drive, but if it can wait and meet up later then that's fine too. I live on the new Brighton-Roseville border, off old 8 and cty d. My number is 651-468-6391. Ill go and check right now if it's still there.
Thanks,
Dan.

TkrPerformance 06-29-2009 12:57 PM

Re: WTB: 1G Driver's Side Motor Mount
 
I have 2 of them.
1. is set up for a polly already
2. is stock staring to rip but not all the way thought. I do have a lot of polly uratine that you could use to fill it with.

Constant_Project21 06-29-2009 01:16 PM

Re: WTB: 1G Driver's Side Motor Mount
 
Mines out and ready for ya whenever shane.


All times are GMT -5. The time now is 04:08 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.