1g Crossdrilled rotors for big brakes
 

As the title says. I went back to stock ones to attempt to conform to stock class rules for autocross. They're in really good shape, not many miles.

$50, and I'll even deliver if you're reasonably close to Crystal.

Re: 1g Crossdrilled rotors for big brakes
 

how much shipped to roch

Re: 1g Crossdrilled rotors for big brakes
 

a lot. They're heavy.

Re: 1g Crossdrilled rotors for big brakes
 

No warpage or grooves or anything? Not glazed? I'm very interested.

Re: 1g Crossdrilled rotors for big brakes
 

can you put up a couple pics??

Re: 1g Crossdrilled rotors for big brakes
 

I dont know how picky you are, they probably do have some grooves. I would definitely recommend getting them machined, but thats a lot cheaper than buying these puppies new. They haven't been machined before, so they have lots of life.

I'll get some pics up today.

Re: 1g Crossdrilled rotors for big brakes
 

Correct me if I'm wrong, but drilled or slotted rotors can't be machined.

Re: 1g Crossdrilled rotors for big brakes
 

They can be technically, but the shop will go though so many bits and pass the cost onto you. I've seen what happens when someone tires, best off you just get new ones.

Re: 1g Crossdrilled rotors for big brakes
 

ah, thats information to me. They may not need machining... I'll put up pics. That makes me glad that I got blanks :)

Re: 1g Crossdrilled rotors for big brakes
 

After looking at them again, they're really not that bad at all. I'm confident you could run them just fine without machining. Also got pics, front and back of every rotor, may not be in any certain order.
http://img200.imageshack.us/img200/5103/sdc10334.jpg http://img33.imageshack.us/img33/9448/sdc10326.jpg http://img29.imageshack.us/img29/5410/sdc10327.jpg http://img132.imageshack.us/img132/5306/sdc10328.jpg http://img34.imageshack.us/img34/7145/sdc10329.jpg http://img29.imageshack.us/img29/7350/sdc10330.jpg http://img32.imageshack.us/img32/729/sdc10332.jpg http://img32.imageshack.us/img32/219/sdc10333.jpg

Re: 1g Crossdrilled rotors for big brakes
 

A lot of what you see on the rotors is just light dust, as well.

Let me know if you're interested!

Re: 1g Crossdrilled rotors for big brakes
 

oops, double post, sorry

Re: 1g Crossdrilled rotors for big brakes
 

anyone?

Re: 1g Crossdrilled rotors for big brakes
 

is there 4 rotors or did you double post your pictures to

Re: 1g Crossdrilled rotors for big brakes
 

4 rotors. I posted back and front pictures of all of them.

Re: 1g Crossdrilled rotors for big brakes
 

anyone?

Re: 1g Crossdrilled rotors for big brakes
 

still have these!

Re: 1g Crossdrilled rotors for big brakes
 

all 4 of them for 50.00 if so I can pick them up asap

Re: 1g Crossdrilled rotors for big brakes
 

already pm'ed him

Re: 1g Crossdrilled rotors for big brakes
 

All yours. Let me know when you want them, they're located in Crystal.