MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)
-   -   WTB: 1G AWD strut assembly and springs (http://www.mitsustyle.com/forums/showthread.php?t=22798)

turboimports 04-08-2009 08:10 AM

WTB: 1G AWD strut assembly and springs
 
Hi all.
Looking for some good 1G AWD strut/plate/boot/bumpstop/spring assembly. Must be in good shape.
Otherwise, I may just take the boots, bumpstops, plates/rubbers, etc.
I already have a set of springs, struts and plates, but I do need the parts from the second list above.

Thanks.

-Lor

Jaei Sun 04-08-2009 09:40 AM

Re: WTB: 1G AWD strut assembly and springs
 
I have 2 front strut assm. from a 92 AWD with about 95,000 miles on them, in good-great shape from a rust free car. Rode fine w/ good damper/rebound, they were removed because k-sports went in.

turboimports 04-08-2009 09:42 AM

Re: WTB: 1G AWD strut assembly and springs
 
I need a full set of four, otherwise I'd like to find the guts such as the boot/bumpstop/rubber bushings that holds the springs on the seat and hat.

Does yours have those? How much?

Jaei Sun 04-08-2009 12:30 PM

Re: WTB: 1G AWD strut assembly and springs
 
I also have the rears as well, All four are still assembled (the spring never removed from the strut / shock. The only problem is on one of the rear shocks, the rubber bushing on where the bottom of the shock bolts to the lower control arm is shot.

turboimports 04-08-2009 07:02 PM

Re: WTB: 1G AWD strut assembly and springs
 
Pm me how much you want for them all. I'll probably just use the guts/parts off of them then.
Not looking to spend much.

Thanks.


All times are GMT -5. The time now is 04:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.