Alot of 1g & 2g Parts For Sale
 

DSM Parts

Need to sell these parts ASAP so I do not have to bring them with me when I move.

Send me any reasonable offers!

1g grey leather seats with matching door panels
1g dark grey door panels driver and passenger
1g center consol carpet
1g auto transmission transfer case
1g intercooler
1g rear passenger tail light
1g stock floor mats
2g fwd driver axle
2g awd passenger front axle
2g radiator
2g talon passenger tail light
6 bolt 2.0 block
6 bolt 2.4 block


Here are more parts for sale. Just send me an offer.

1g---
6 bolt timing belt >500 miles
plug wire cover
harmonic balancer
dip stick & tube
front seal housing
tensioner arm and motor mount
timing pulleys
Lower crank timing belt sprocket
1g Non Turbo Throttle body
plug wires
transistor
o2 housing gasket
exhaust mani gasket
fuel rail
FPR fuel pressure regulator
manual 91+ shifter assembly
driver mirror
throttle position sensor
awd brand new rear rotors
valve cover bolts
gauge cluster with 112K miles
flip up headlight bulbs brand new
delta gate 38mm wastegate needs seal
90 awd 4 spyder center differential
flip up headlight assembly with bulb
radio trim
cup holder
flip up headlight motor
flip up headlight trim
stock boost tubing

2g---
center vent with switches
radiator hose
97+ turbo ECU
Plug wire cover
stock fuel line from filter to rail
harmonic balancer
stock fuel pump
maf sensor extension wire
shift fork
front seal housing
timing pulleys
Random brake pads with very low miles
transistor
turbo water pipes
o2 housing gasket
manual shifter assembly
speed sensor
stock throttle body with lower sensor
gauge cluster trim
Infinity stock amp
thermostat housing
starter
dual piston front calipers
aftermarket rear muffler
High flow magnaflow 3" cat

Re: Alot of 1g & 2g Parts For Sale
 

Can you send me pics of the 1g door panels? thanks.

mbgoodhart@msn.com

Re: Alot of 1g & 2g Parts For Sale
 

$50 on the magnaflow cat??

Re: Alot of 1g & 2g Parts For Sale
 

I dont have any photos but they are in perfect shape and I think all the switches are even still there. PM me if interested with an offer.

Re: Alot of 1g & 2g Parts For Sale
 

Sure when do you want it?

Re: Alot of 1g & 2g Parts For Sale
 

Shit, I forgot to ask. Are they for power windows and locks?

Re: Alot of 1g & 2g Parts For Sale
 

Yep!

Re: Alot of 1g & 2g Parts For Sale
 

friday work for you??? i have the day off then

Re: Alot of 1g & 2g Parts For Sale
 

Sure does.

Re: Alot of 1g & 2g Parts For Sale
 

If Goodhart backs out of the door panels I'm interested. I'm also interested in the floor mats.

Re: Alot of 1g & 2g Parts For Sale
 

Who ever gets them first. I need the stuff gone. $50 takes both door panels and you can have the mats with the panels.

Re: Alot of 1g & 2g Parts For Sale
 

hey Kerry buddy!!! I still have the bad 6 bolt crank you sold me. Remember u said ur gonna give me my money back!! Well I'm still waiting on it. I hope you aren't planing on takeing off without givin my money back. good luck on the sale.

Re: Alot of 1g & 2g Parts For Sale
 

dude give it up! I have more people to back me up on this forum then you even know on here. I had that crank inspected by a well known motor builder on here by the name of motors by gosh. the crank was turned, inspected, measured, and hot tanked ready to be used. what you did to it 3 months later after I sold it to you is your deal. back on subject. as of right now the door panels are spoken for and are being picked up tonight. need to sell everything so send me a pm on what you want.

Re: Alot of 1g & 2g Parts For Sale
 

is that ecu eprom

Re: Alot of 1g & 2g Parts For Sale
 

nope this is a 97+ and mainly only some of the 95 ecu's were eprom

Re: Alot of 1g & 2g Parts For Sale
 

Dude I had the crank inspected at MAP by their engine builder the crank was nothing but bad news. Every thing you said about the crank was a lie!!! The crank needs to be machine and the key way need repair.

Re: Alot of 1g & 2g Parts For Sale
 

Well either you fucked it up or it isnt the same crank because I had just got it back from the machine shop before selling. If this was the issue then why wouldn't you say something right away and not wait over 3 months??????? even if it was perfect MAP would never install a turned crank for a customer anyways so of corse they are going to tell you things like that. Now stay the fuck out of my for sale thread.

Aftermarket 3" cat sold, thanks ryze! Let me know if you have any issues. Door pannels being sold on friday.

Re: Alot of 1g & 2g Parts For Sale
 

Stinger2G, unless you're interested in buying something any more posts in this thread and you'll be sent on a pleasant vacation. Take it to PMs if you have an issue with 95talonracer.

Re: Alot of 1g & 2g Parts For Sale
 

PM send

Re: Alot of 1g & 2g Parts For Sale
 

Dude stay the FUCK out of my fucking for sale thread if you have no interest in buying my parts. How fucking hard is it???????????????

Door panels sold.
Aftermarket cat sold.
2g fwd driver axle sold.