![]() |
Recent Data Log
Hoping I can get some second opinions on how my car is running. This is at 18 psi then falling to 16.
http://www.dsmstyle.com/photopost/data/517/4-4-09.jpg |
Re: Recent Data Log
Looks good to me.
|
Re: Recent Data Log
Instead of worrying about wot start tunning fuel trims. Looks to mee like the car is lean.
|
Re: Recent Data Log
Quote:
|
Re: Recent Data Log
But he isn't knocking. I'd go as lean as possible til you knock and back up a little. Running pump gas should limit you to around 11.5 a/f max. Which is a good pump a/f.
|
Re: Recent Data Log
I get a 1 random count of knock once in a while but I've narrowed it down to phantom knock, something with the lifters.
|
Re: Recent Data Log
Yeah it looks good. You could lean it out a little more. If you got a wideband that would really help. I almost learned the hard way!
|
Re: Recent Data Log
Quote:
|
Re: Recent Data Log
11 what and 10 what? Sorry I didn't remember seeing a wideband in there.
|
Re: Recent Data Log
Quote:
|
Re: Recent Data Log
I'm guessing 11.6 in the mid-low rpm and 10.8 in the upper range? I guess that seems alright since you're just tuning with the maft correct?
|
Re: Recent Data Log
Quote:
|
Re: Recent Data Log
Not sure.. I haven't heard of anyone doing that with just a palm and mmcd.
|
Re: Recent Data Log
Those timeing numbers scare me. but theres no knock. you definitly need to work on your fuel trims.
|
Re: Recent Data Log
He peaks at 17 degree's of timing wot. What's so bad about that?
|
Re: Recent Data Log
Quote:
But I thank you for the advice, I really do. |
Re: Recent Data Log
From my experience and searching 1g's tend to run alot of timing stock.
|
Re: Recent Data Log
The stock timing maps are intended for a car running stock low boost though and not leaned out at all. They are usually too aggressive for pump gas and high boost. But every car is different and who knows where his base timing is set at.
Is this car stock injectors? Is that logger really slow? It looks like there are only 2 lines of data for every second. |
Re: Recent Data Log
He's on evo 560's
|
Re: Recent Data Log
I'm just working with a palm IIIxe with mmcd and a wideband. And yes, 560's. I do not know what my base timing is set at. I don't have a timing light or access to one so I can't check.
|
All times are GMT -5. The time now is 06:42 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.