valve cover with big breather lines.
 

Can you guys post up pics of where people usually put the upgraded "breather" lines in the the valve cover on DSMs, i got an extra valve cover that I want PC'd and i want to put bigger lines in cause i am tired of the dipstick doing all the venting for me.

Thanks.

My Catch can is right in front of the stock battery, on top of the tranny pretty much.

Re: valve cover with big breather lines.
 

swing by if you wanna really look at it. or go on talk. mine is where the stock ones where, just welded some fittings on, then drilled out the center to match the bung. Others do a 90 off the top of the vc (not as clean IMHO) otherwise guys like eagle claw did his both from the back, MAP's FDSM has 4, with some crazy ass tubing stuff off the top.

-A. Swift

Re: valve cover with big breather lines.
 

http://i6.photobucket.com/albums/y202/C3L1CA/ohboy.jpg

http://i6.photobucket.com/albums/y202/C3L1CA/ohboy2.jpg

http://i6.photobucket.com/albums/y202/C3L1CA/ohboy4.jpg

http://i6.photobucket.com/albums/y20...A/DSCN1749.jpg

http://i6.photobucket.com/albums/y20...len_catch1.jpg

http://i6.photobucket.com/albums/y20...atepics092.jpg

http://i6.photobucket.com/albums/y20...atepics095.jpg

All the random pictures I have saved. I think I'm going to go with a setup like the first couple pictures.

Re: valve cover with big breather lines.
 

Thanks Brad.

I want to go with a setup like the first one i want to use pushlock line on mine too.

Re: valve cover with big breather lines.
 

Wow, Brad did my work for me! Anyway, a few shots of mine as it sits:

Catch can, off MAP's FDSM:
http://i48.photobucket.com/albums/f2...220091612a.jpg

Valve cover with the lines:
http://i48.photobucket.com/albums/f2...220091612b.jpg

overall:
http://i48.photobucket.com/albums/f2...220091612c.jpg
http://i48.photobucket.com/albums/f2...0220091612.jpg

-A. Swift

Re: valve cover with big breather lines.
 

^what size lines are those?

i want some good size line so i don't have to worry about it.

Re: valve cover with big breather lines.
 

I might need a good vented setup, what catch cans you guys using/modding?

Re: valve cover with big breather lines.
 

I got an ebay one that i will be welding the right size pushlok fittings to.

Re: valve cover with big breather lines.
 

mine was made by jmf. as for line size it is ~8. You really won't need much bigger then that. I'm trying to decide if i need a re circulation line from the catch can to my new intake pipe.