New navy guy from norfolk, va, 1g talon.
 

Hey guys wats goin on? just joined the site. This is my 3rd 1g awd. Heres my setup tell me whatcha think.
My Mods:
Walbro 255, 850cc injectors, fpr, aem wideband, autometer boost and egt guage, Apexi safc II, Stage 3 eprom ecu chipped by keydiver(dsmchips.com), 2 step studder box, car is tuned right now for 10:5 afr at WOT(up to 24psi), 2g 8:5:1 pistons, BIG 1g rods, cometic metal head gasket, kyb adjustables all around stock springs, huge fmic with 2.5" piping all around, 3" apexi exhaust turbo back, 8lb fidanza flywheel, act 2600 clutch, MHI 20g turbo, comp cams 101200 cams, hks adjustable cam gears, 3rd gen lifters/rockers, balance shaft removed, short throw shifter, mbc will be set probabaly around 22psi for track runs, will be running my evo 8 wheels with street radials to start with. Probably forgetting a few things, but you get the idea.


http://i450.photobucket.com/albums/q...GDSM/001-2.jpg
http://i450.photobucket.com/albums/q...GDSM/002-2.jpg
http://i450.photobucket.com/albums/q...GDSM/004-4.jpg
http://i450.photobucket.com/albums/q...GDSM/007-4.jpg
http://i450.photobucket.com/albums/q...GDSM/009-1.jpg
http://i450.photobucket.com/albums/qq227/DDGDSM/008.jpg
http://i450.photobucket.com/albums/q...GDSM/004-5.jpg

Re: New navy guy from norfolk, va, 1g talon.
 

Lean that pig out! Welcome to the board :)

Re: New navy guy from norfolk, va, 1g talon.
 

Couldnt afford an evo so i baught one of these and now im faster then alot i run into for a 8th of the price. Less than 4k in the whole ride. 387 awhp b4 the cams I just put in.

Re: New navy guy from norfolk, va, 1g talon.
 

Welcome... Car looks good. Ditch that long route intercooler piping and get MAFT, either that or get a BOV that recirculates. Other than that it's definitely a nice car! Tial's new BOV has a recirculate attachment if you didnt know.

Re: New navy guy from norfolk, va, 1g talon.
 

Once again nice car. Joining all the forums you can now huh? lol

Re: New navy guy from norfolk, va, 1g talon.
 

Well that piece of my bov goes back into my intake manifold. Im workin on gettin a shorter route piping, and i already have a 2g maf, and my ecu is chipped by keydiver for the 2g maf.

And if it has to deal with dsm's or 4g63's then im all for joining as long as their not a bunch of *** jockeys.

Re: New navy guy from norfolk, va, 1g talon.
 

Definitely a clean looking DSM, especially for how little money you have into it.

Re: New navy guy from norfolk, va, 1g talon.
 

Not too bad, and welcome.

Re: New navy guy from norfolk, va, 1g talon.
 

Another Norfolk Navy boy, welcome!

Re: New navy guy from norfolk, va, 1g talon.
 

Welcome! Alky or E85 on that setup would make some serious power! Car looks nice!

Re: New navy guy from norfolk, va, 1g talon.
 

Welcome! I agree, you need to lean that thing out a little, you could probably pick up a few hp. 387 awhp on a 20g huh? Is that on race gas, or e85?

Re: New navy guy from norfolk, va, 1g talon.
 

Race. that was before the new cams and im gonna go down to the dyno in chesapeake with these new cams/gears and see if they can pull a few more poneys out. see what we can work with. I finally got those evo8 wheels that ive wanted for so long which pretty much does it for the exterior except a cf hood.

Re: New navy guy from norfolk, va, 1g talon.
 

Haha, I saw your thread on Talk.

Welcome to Style, you'll enjoy it here.

Re: New navy guy from norfolk, va, 1g talon.
 

Nice, welcome.

Re: New navy guy from norfolk, va, 1g talon.
 

Lower it; clean car though.

Re: New navy guy from norfolk, va, 1g talon.
 

workin on gettin a pro kit from eibach