MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   how do I seperate the axle (http://www.mitsustyle.com/forums/showthread.php?t=21102)

slowboy101 10-19-2008 05:28 PM

how do I seperate the axle
 
How do I seperate the passanger side axle from the trany is there a clip inbetwen?

95talonracer 10-19-2008 06:24 PM

Re: how do I seperate the axle
 
It is a bitch but you just have to use a heavy duty pry bar and pop it out of the tranny. There is a clip on the end of the axle inside of the tranny that slips into a groove and you have to pop it past the groove.

dsm9sec 10-19-2008 06:43 PM

Re: how do I seperate the axle
 
I always just pulled it out with my hand.. Be sure to grab it BEFORE the knuckle.

JET 10-19-2008 11:42 PM

Re: how do I seperate the axle
 
Yeah, many get stuck. Just put a good sized pry bar in the bottom between the tranny and very inner part of the CV.

slowboy101 10-20-2008 12:26 AM

Re: how do I seperate the axle
 
thanks guys for the help I ended up taking out the battery tray and doing from the top

Super Bleeder!! 10-20-2008 12:30 AM

Re: how do I seperate the axle
 
Yea popping axles out sucks. Makes me wish i had one of those sweet slide-hammer deals.


All times are GMT -5. The time now is 12:29 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.