Beater 2g
 

I've always loved the look of a 2g eclipse, and when I saw a black 95 gsx go up for sale on mnsc for 2k I just had to pick it up. It has been a pretty slow process, but it's been really fun project and I've learned more than i ever thought I could.

Story:
Picked the car up in September of 07, with "engine problem."


http://i6.photobucket.com/albums/y20...w/DSCN0232.jpg

I tried to get the car running for a couple days but decided it wasn't worth the money or time to figure out what was wrong with it. So it sat for a while before I had some time to start ripping it apart.

http://i6.photobucket.com/albums/y20...IMG_9108-1.jpg
http://i6.photobucket.com/albums/y20...IMG_9247-1.jpg
During tear down I figured out why it had "engine problems"...
http://i6.photobucket.com/albums/y20...w/IMG_9496.jpg
At least I made a crank puppy out of it
http://photos-f.ak.facebook.com/phot...75237_6945.jpg

Over the next couple months I picked up a rebuilt 6 bolt motor and some other goodies. The car also just kinda sat there most of the winter because of no real time to work on it.

http://i6.photobucket.com/albums/y20...w/DSC02206.jpg

http://i6.photobucket.com/albums/y20...w/IMG_9542.jpg

Fixed the normal 2g rust problem
http://i6.photobucket.com/albums/y20...w/DSC02223.jpg

Finally got things all put back together about a month ago.
http://i6.photobucket.com/albums/y20...w/IMG_9710.jpg

Ready for the first test drive
http://photos-h.ak.facebook.com/phot...16767_4455.jpg

Complete mod list:
Rebuilt 6 bolt w/balance shafts removed
272 DKS cams
DSMLink
AEM Fuel Rail
1600cc injectors
FP3065
FP exhaust Manifold
JM Fab "Race" Intake manifold
3" Megan down pipe
FP 2.5" o2 housing
tial 44mm wastegate
arp head studs
cometic head gasket
fp 4" intake
K&N filter
fp oil feed from head
fp oil drain
fp -4 inline filter
hallman pro boost controller
maf translator
msd wires
prothane motor mount inserts
sbr/kentics fmic
tial q bov
re-wired 255
tractor battery:rollinglaugh:
custom mount for said battery
Compeititon clutch stage 4 clutch
fidanza flywheel

Think thats all the major stuff.

Hopefully she puts down at least 100awhp. Gotta set my goals low so if I make more than that, I can just be that much happier.:biggrin:

Re: Beater 2g
 

Looking good Brad. Can't wait to hear that thing spool!

Re: Beater 2g
 

Thanks Brian! Hopefully you'll hear it sooner than later ;)

Re: Beater 2g
 

Looking good. Thats how my car is gonna be like if i keep it. Bad thing is I got no room like you do. Fixing it would take about the same amount of time.

Good job tho. Well done.

Re: Beater 2g
 

Thanks man!

Re: Beater 2g
 

Dude, awesome build! Take that thing to shane filled with E85 (I'm assuming that's why you went with the 1600's?) and put down some powa. I'm sure there'll be some kinks in it but damn, a year in the making (only!) and looking good. Any suspension mods on that thing? Springs/shocks, and at least pads would be good :)

Re: Beater 2g
 

Nice work brad. You got er done faster than I really expected.

What I like most about this build is that this is your first turboed car ever haha, and you flippin just went to town. Psh who starts small anymore lol

Re: Beater 2g
 

Thanks Scheides. Yes, it is running e85 and will be going up to Shane soon I hope. Hell the car probably wouldn't be running without Shane, I asked him a random question everyday for a while there about the 6 bolt swap and other little things, Shane is the man! Stock suspension is still in it, kinda ran out of money :( Some springs/struts will probably be the next thing I buy, as I don't really like it looking like a 4x4. Got some hawk hps pads on it and some fresh rotors. It also has a couple new calipers as it seems like every bolt on this car is rusted and wants to break off. Still have a LOT left to do but she's getting there.

Thanks again for the kind comments guys!

Re: Beater 2g
 

haha Thanks Brian! I didn't think it'd get done till next year for a while there, but seeing fast cars everyday in the summer lit a fire under my butt to get it done. I still think of my build as small after seeing Shane's turbo next to mine :rollinglaugh:

Re: Beater 2g
 

Looks nice, I like the mods. Push that stock 6 bolt!

Re: Beater 2g
 

looks super nice! good work!

Re: Beater 2g
 

(i want a ride after some tunage happens)

Re: Beater 2g
 

Thanks! Hopefully I can push the 6 bolt pretty far, only time will tell though.

Thanks man, you're welcome to a ride any time after it gets tuned.

Re: Beater 2g
 

Considering he works at DB, i think he'd get in trouble if he had it tuned anywhere else ;) haha

Re: Beater 2g
 

didnt know that, when i get tuned today say hi!

Re: Beater 2g
 

I used to work there, I had to leave because of school :( Really miss going there everyday, that was the best job I've had or will probably ever have. DB ftw

Re: Beater 2g
 

That motor will hold. It was built by the best. LOL Damn I didn't know you were going that far nice. Good luck.

Re: Beater 2g
 

One other thing. Those DKS cams like to be degreed. Mabye some cam gears before the tune.

Re: Beater 2g
 

Well done Brad.

Re: Beater 2g
 

word. congrats i want a ride, motor looks gorgeous.

Hopefully it all goes well.