Need Wiring Info for Older Greddy EGT
 

If anyone still uses this old school pile let me know, it came with my shell and the owner before me just murdered the harness and did some crazy stuff with this thing, the pics will show what I mean with the box.

So if anyone can tell me what pin on the box goes where it would help oh so dearly very much.

What it looks like.

http://img134.imageshack.us/img134/2...0146jw9.th.jpg


The pin out

http://img125.imageshack.us/img125/2...0148ma9.th.jpg

Like I said. Its messed up. He just soldered wires right to the pins :KANE:

for the pin out if I could maybe get it in left to right format

i.e. p1=blah p2=blah p3=blah ya know. Like that.

The top plug in just because I can show it

http://img515.imageshack.us/img515/6...0147td1.th.jpg

And the gauge for reference

http://img108.imageshack.us/img108/3...0149mp6.th.jpg

and yes that is a real tattoo.

Re: Need Wiring Info for Older Greddy EGT
 

it is just the older verson of the box. it will be the same wiring as the newer ones. you can get them right off greddys web site. it will be the peak hold verison

Re: Need Wiring Info for Older Greddy EGT
 

I checked those out. But I still need like an idea where to start, even just a pin to color comparison would be great, because I have nothing to go with here at all. Its that bad. I just have a box, and a gauge. No probe, no harnesses. Its not cool.

Re: Need Wiring Info for Older Greddy EGT
 

I would tell you mine but it is hiding in the dash and the rollcage is in front of the panel were all of them are

Re: Need Wiring Info for Older Greddy EGT
 

Sawzall :D