MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Venting Into Intake Vs. Using Blow Thru Piping (http://www.mitsustyle.com/forums/showthread.php?t=2007)

SquackDiddy 03-07-2004 09:57 PM

is it better to keep the turbo spooled or vent it into the air with the blowthru stuff?
performance wise.

npaulseth 03-07-2004 10:03 PM

uuuuh, get a stock 1G BOV, keep it that way, and you'll be fine.

Shane@DBPerformance 03-07-2004 11:05 PM

BTW, dumping it back into the intake does not really help keep it spooled.

JiN 03-08-2004 05:35 AM

Im venting to the atmosphere, and I dont want to anymore. It's dumb. You'll want to recirculate it back to the intake. It's only fun for so long having a loud ass BOV, but once it starts making the performance a little crappy, then it gets stupid.

SquackDiddy 03-08-2004 07:03 AM

so you got the GM MAS and the blowthru piping?

npaulseth 03-08-2004 08:25 AM

No, he doesn't. That's why he's losing performance. You won't need a GM MAF+T untill you are making some decent power. Once you do that, you can have it configured so that you can vent.

SquackDiddy 03-08-2004 07:49 PM

yeah thats what im asking, when you have decent power. should you put the GM MAF on the intake or should you use the blowthru piping and dump it in the air?

-GSX-Falcon 03-08-2004 09:05 PM

Im going to say this simpy. If you dont have a MAFT do not vent. If you plan on getting a MAFT just so you can vent...you are not ready for a MAFT.

Edit: The GM MAFT is a BLOW-THRU setup, they are one in the same. The MAFT is the sensor/translator. The Blow-Thru is the kind of piping it uses.

SquackDiddy 03-09-2004 07:42 AM

1 Attachment(s)
no, the blowthru is one of the options you could do. this is clearly on the intake and it is dumping back into the intake with the GM MAF.

Kracka 03-09-2004 08:48 AM

A Ramchargers MAF-Translator can be used as either a pull-through or a blow-through setup. Which you choose to use should be based off a few different things. If you must blow-off to get the 15 year-old hunnies, then you will want to go blow-through. If you want a car that is easier to tune and idles better, go pull-through. Most cars should go pull-through; the ones making a large amount of power can better utilize blow-through. I personally am going blow-through this spring so that I am able to run a cold-air-intake with the air filter down inside the front bumper. I think everyone has their fair-share of research to do before stating any more "facts".

Matt D. 03-09-2004 12:48 PM

Guys, do some fucking research before you start posting up what you think is the truth. Hughes set you all straight here, but it's as if all of you newbies are getting Big Penis Syndrome hoping that you'll prove to everyone that you know the most... It doesn't work that way around here. Start reading up on shit, then start talking once you know something. Stupidity and ignorance will not get you far at all around here.

-GSX-Falcon 03-09-2004 01:04 PM

I would like to apologize. I had never seen the MAF in the intake before, only in the UICP. My apologies. I had never actually researched but read alot "in passing". Again im stupid.


:headache:

AJ 03-09-2004 01:23 PM

Matt makes an excelent point, but don't beat yourself up over it, your not stupid. Everyone starts somewhere but there are soo many places to get correct info the first time.

Super Bleeder!! 03-09-2004 03:13 PM

hopkins is not one of those places

john 04-17-2004 07:11 PM

Quote:

Originally posted by gixxer@Mar 9 2004, 03:13 PM
hopkins is not one of those places
This is only a month and a half old but I just saw it while searching. WTF are you talking about? What makes me uncredible?

Matt D. 04-17-2004 11:03 PM

http://www.digitalmatt.org/gallery/a...hijacklive.jpg

TheBlizzard 04-18-2004 02:39 AM

If I have to read through another one of these threads I am going to fucking rip all my hair out and have someone kick me right in the nuts. :headache:

As CVD would say AHHHHH @#$% :rant:

CRAIG


All times are GMT -5. The time now is 04:24 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.