MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Tuning/Electrical (http://www.mitsustyle.com/forums/forumdisplay.php?f=90)
-   -   DSM Link and 1600CC injectors (http://www.mitsustyle.com/forums/showthread.php?t=19805)

Mark Leasure 06-16-2008 03:40 PM
DSM Link and 1600CC injectors
 
I bought a car with DSM link and I’m going to convert it to E85. I'm a noob when it comes to DSM link. Is it capable of controlling 1600CC injectors? I have an extra set of 1600CC injectors that i want to use.

niterydr 06-16-2008 03:43 PM
Re: DSM Link and 1600CC injectors
 
http://www.mitsustyle.com/forums/sho...t=dsmlink+1600

Upper right corner of the screen, between new posts and quick links. There are a few threads even on this forum about dsmlink and 1600cc injectors, not to mention the www.dsmlink.com forums and www.dsmtuners.com

HiImBrian 06-16-2008 03:56 PM
Re: DSM Link and 1600CC injectors
 
link can only control one set of injectors. But yea, it'll hold the one set of 1600s just fine

Mark Leasure 06-16-2008 03:59 PM
Re: DSM Link and 1600CC injectors
 
Thanks for the information, I guess my laziness got the better of me. I need to change the registration on the DSM link to use their forum. I'm not a member yet.

Halon 06-16-2008 04:00 PM
Re: DSM Link and 1600CC injectors
 
Get on the DSMLink forums.

Goat Blower 06-16-2008 04:43 PM
Re: DSM Link and 1600CC injectors
 
In short, it works better with E85 than with regular pump. I'm still sorting out my TB issues, but I've gotten it to idle better than it did with the AEM. It just sucks when you can't find E85.

Mark Leasure 06-16-2008 06:00 PM
Re: DSM Link and 1600CC injectors
 
Here is what i got when I tried to register:

"Sorry, registration has been disabled by the administrator"

I emailed them??? Will I get a responce?

twack 06-16-2008 06:23 PM
Re: DSM Link and 1600CC injectors
 
youl get a response it might take awhile, just email them you name and password you want and the number on your dsmlink.

-side note. will the stock fuel pump handle e85 and 1600cc injectors

Mark Leasure 06-16-2008 07:14 PM
Re: DSM Link and 1600CC injectors
 
nope, dual 255l walbros

Goat Blower 06-16-2008 10:23 PM
Re: DSM Link and 1600CC injectors
 
You could just slap an inline walbro 392 in addition to the in-tank. But I like my dual Walbro in-tanks. I can almost here them over the exhaust. :-)

Mark Leasure 07-17-2008 09:48 AM
Re: DSM Link and 1600CC injectors
 
What dead time values are people using for 1600cc on DSMlink?

asshanson 07-17-2008 11:03 AM
Re: DSM Link and 1600CC injectors
 
I just installed some PTE 1600s a couple days ago.
-53% global, around 450us dead time, but I have lowered my base fuel pressure to 40psi (2g)

Edit: I had to raise my idle a bit, with 280ish cams and 900rpm it would want to die sometimes because it dipped too low. Now I'm at 1050rpm idle and it's great.

turbotalon1g 07-17-2008 03:56 PM
Re: DSM Link and 1600CC injectors
 
I can check my old settings if you need or send you the file.

I got my 1600s to idle mint.

Halon 07-17-2008 05:49 PM
Re: DSM Link and 1600CC injectors
 
PTE 1600's on e85

-60 & 525 and 9% on my 50hz slider. Idles great.

Click on the link in my sig for an idle vid.

Mark Leasure 07-21-2008 10:00 AM
Re: DSM Link and 1600CC injectors
 
Setup is complete, idle and part throttle is great! I had a failing O2 sensor that was causing tuning issues.


All times are GMT -5. The time now is 09:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.