MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Reverse lights dont work!! (http://www.mitsustyle.com/forums/showthread.php?t=19372)

GsXtUrBo98 05-07-2008 01:22 PM

Reverse lights dont work!!
 
So rendomly like two weeks ago I realized that my reverse lights dont work anymore. My girl friend just bought a 96 eclipse and her's doesnt work either. Is this common on these cars? What should be the first step on figuring out what the hell is wrong?

The bulbs or ok and the wire's are ok to the housing. What makes the lights go on when you put it into reverse?

Kevin 1G Drummer 05-07-2008 06:05 PM

Re: Reverse lights dont work!!
 
There's a swich on the transmission that may have come unplugged, or a wire is broken somewhere.

GsXtUrBo98 05-07-2008 07:19 PM

Re: Reverse lights dont work!!
 
Quote:

Originally Posted by Kevin_1G_Drummer (Post 240175)
There's a swich on the transmission that may have come unplugged, or a wire is broken somewhere.

where at on the tranny ill have to take a look at it.

Kevin 1G Drummer 05-07-2008 08:22 PM

Re: Reverse lights dont work!!
 
I'm not sure where it is on a 2g, but on a 1g it's right on the top, kind of in the middle.

TkrPerformance 05-07-2008 08:28 PM

Re: Reverse lights dont work!!
 
same spot on the 2g as well

GsXtUrBo98 05-07-2008 08:33 PM

Re: Reverse lights dont work!!
 
ok thanks ill take a look at it.

GsXtUrBo98 06-08-2008 10:46 PM

Re: Reverse lights dont work!!
 
I see the plug in that you guy's are talking about but what would I do to replace it??

Kevin 1G Drummer 06-09-2008 06:03 PM

Re: Reverse lights dont work!!
 
Unplug it, unscrew it, buy a new one, screw it in, and plug it in.

AwdGSX13 06-09-2008 06:50 PM

Re: Reverse lights dont work!!
 
Alot of people don't notice their reverse bulbs are out. You sure it's not just a bad bulb? If not then try the switch.. Other than that your going to have to start tracing wires.

tpunx99GSX 06-09-2008 07:00 PM

Re: Reverse lights dont work!!
 
How many dsmers does it take to screw in a lightbulb? lol

sleepydsm 06-09-2008 07:52 PM

Re: Reverse lights dont work!!
 
lol mine didnt work, was the switch.

GsXtUrBo98 06-09-2008 08:04 PM

Re: Reverse lights dont work!!
 
I'm not too sure what you mean by unscrew it its just a plug in with wire's that disappear into the harness but I could be wrong I'll check again...

clean2g 06-10-2008 03:26 AM

Re: Reverse lights dont work!!
 
get a deep socket, I can't remember what size it is (maybe 17?) and undo and unscrew it. The part under the switch is like a bolt head. When screwing the new one back in, be sure not to screw it in too much/too tight, otherwise the mechanism inside gets jacked, and the switch itself can snap off from the threads/bolt part.. trust me.

GsXtUrBo98 06-10-2008 03:55 AM

Re: Reverse lights dont work!!
 
Quote:

Originally Posted by clean2g (Post 244455)
get a deep socket, I can't remember what size it is (maybe 17?) and undo and unscrew it. The part under the switch is like a bolt head. When screwing the new one back in, be sure not to screw it in too much/too tight, otherwise the mechanism inside gets jacked, and the switch itself can snap off from the threads/bolt part.. trust me.

Ok i'll look tomorrow at what it will take thanks..

4seasons69 06-10-2008 10:20 AM

Re: Reverse lights dont work!!
 
it's not that hard if you want some help I can give you a hand. let me know.


All times are GMT -5. The time now is 05:24 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.