MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Modern Automotive Performance (http://www.mitsustyle.com/forums/forumdisplay.php?f=70)
-   -   Price and Availibility please! (http://www.mitsustyle.com/forums/showthread.php?t=19309)

DSM_421 05-01-2008 02:49 AM

Price and Availibility please!
 
I need three gaskets for a 1g AWD Megan turbo back exhaust please if possible. 4 and 1/4 inch between each bolt hole, that is the center of the bolt hole, with the opening being a little over 3 inches.

I also need gaskets for a LIPP cast o2 housing please.

Thanks,

Anthony

v8klla 05-01-2008 01:04 PM

Re: Price and Availibility please!
 
Will any of these work?

http://vibrantperformance.com/catalo...dd4954c3be209a

In regards to the Lipp gasket it would be $25 plus some shipping let me know!

DSM_421 05-01-2008 06:53 PM

Re: Price and Availibility please!
 
Part #: 1458 would probably work on the 2-bolt gaskets. I just need to know how far they would be from center of each bolt hole if possible thanks!

munchgsx 05-01-2008 08:13 PM

Re: Price and Availibility please!
 
The gaskets that are on it are from vibrant, I'll find the part #

munchgsx 05-01-2008 08:15 PM

Re: Price and Availibility please!
 
Quote:

Originally Posted by munchgsx (Post 239515)
The gaskets that are on it are from vibrant, I'll find the part #

http://vibrantperformance.com/catalo...dd4954c3be209a

DSM_421 05-01-2008 08:42 PM

Re: Price and Availibility please!
 
Thanks man!

v8klla 05-02-2008 10:00 AM

Re: Price and Availibility please!
 
$4.99 for that guy let me know!

DSM_421 05-02-2008 01:04 PM

Re: Price and Availibility please!
 
I will take all the gaskets, I'm also gonna need a 2.5" two bolt gasket.
So the list is:

3 x Part #1458
1 x Part #1457
1 x LIPP o2 gasket

Are you gonna be at the dyno day? I could pick them up then from ya...

v8klla 05-02-2008 02:11 PM

Re: Price and Availibility please!
 
We wouldn't be able to have them until middle of next week, let me know if that is ok!

DSM_421 05-02-2008 04:17 PM

Re: Price and Availibility please!
 
Yea that is fine, go ahead and order them. If I had you ship to Spooner, WI. What am I looking at for shipping?

v8klla 05-02-2008 06:25 PM

Re: Price and Availibility please!
 
Probably $8, want to go that route? Either way PM me your email address and I'll shoot you a payment request to get them coming thanks!

DSM_421 05-05-2008 08:48 PM

Re: Price and Availibility please!
 
I just tried paying for it, but for whatever reason when I made my Google Checkout account it was under my Dad's email and I don't know his password.

He is in Chicago until Thursday night, I will have to try again when he gets back, unless I can pay through paypal?

v8klla 05-06-2008 09:42 AM

Re: Price and Availibility please!
 
We can do paypal simply send it to sales@maperformance.com for the amount of the request thanks!

DSM_421 05-09-2008 03:32 PM

Re: Price and Availibility please!
 
Money sent, sorry for the delay!

Via Paypal, shippping address, 1431 Perry Lane, Spooner WI, 54801

DSM_421 05-12-2008 12:00 AM

Re: Price and Availibility please!
 
Let me know if you guys get this sent out tomorrow or not please! :)

Sent the money via paypal, should be under Mark or Anthony Spease.

Let me know if you need a shipping address, should be in the payment info with the paypal.

Anthony

v8klla 05-12-2008 09:53 AM

Re: Price and Availibility please!
 
Everything is on the way thanks! Should be arriving in two packages.

DSM_421 05-12-2008 03:37 PM

Re: Price and Availibility please!
 
Sounds good, I'm going to be ordering some vibrant couplers before too long as well.


All times are GMT -5. The time now is 03:00 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.