Spring Dyno Day Mods! Who's doing what!?!?
 

I'm toying with the idea of dynoing my evo, still not sure. If I do, it will be interesting.

Last dyno @ DB, 304whp @ 24.5psi on 1/2007

Since then added:
SS o2 housing
Ported turbine housing
Ported Exhaust manifold
IX turbo
GM BCS, upped to 26psi
Ported intake manifold
65mm throttle body
Kraka Vents (TM) ;)

I have an evo X MAP sensor on order. If it comes in time, I might make the plunge!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Hmmmm...nothing!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I am going to add an O2 housing, cone filter, and hopefully some decent cams.

Scheides, I need your help with my ECU. :D

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Sine the last time may car was dynoed (222 fwhp pump gas) this is what has been added:

e85
built bottom end
60mm throttle body
Hanh S20g Turbo
Hahn 3" Downpipe
Hahn 3" Racepipe
Thermal Research 3" Cat Back Exhaust
Greddy Type-S BOV
Greddy Profec B-Spec II
Aeromotive 1:1 FPR
Walbro 255lph Fuel Pump
Accell In-Line Fuel Pump
Ross Racing -6 AN fuel rail
880cc Injectors
Megasquirt
Crane #14 Turbo Cams
Crane Valve Springs
Crane Titanium Retainers
3.55 Trans
Quaife LSD
Spec 5 Clutch

I'm interested to see what it'll put down

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

My car: nothing
My bike: Never been on a dyno, so it'll be interesting.

If weather permits, I'll be bringing the bike.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

we'll see how my car is running by then but nothing special just same old stuff.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

if I have time to do it
8an fuel lines
and a quick street tune.
other wise the car will not hit the rollers

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Last time my car put down 282.2 @ 20 psi at DB

I hope to be able to walk within the next week and get my 3" Megan TBE w/ test pipe and LIPP cast o2 Housing on by dyno day.

That would be to replace my ported 2g o2 housing, my 2.5 inch downpipe, and really restrictive 3" pressbent exhaust that has many bends in it.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll finish putting in my front components, mount the amps and build a custom box for the subs.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Wow i didnt know they were having Db Drags as well. lol

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

If I dyno. New Mods will be 150# injectors and a 30+ psi street tune. hopeing for 500+ FWHP

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Last time at the dyno i put down almost 300, so this time with all the mods i am hoping for a little more.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I got a new turbo and a new clutch that will hold my power on the dyno now. Hopefully its done by then.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll hopefully be getting some fresh paint, and a rent-tux. same day as prom woo!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll be running my craptastic tune for Holiday winter E85. I made 380whp last time, will be less this time

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I won't be there to shit in everyones wheaties like 2006 :)

Good luck everyone!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

last time I dynoed I made 265awhp. Since then I've added a bigger intake and a new clutch. If I decide to put my 1000s in I'll be running e85, but I'm really having a hard time deciding if I want to or not. idk if making more power is worth breaking more things lol.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'd say throw the 1000s on and let er buck with some e85. With the power you are making you shouldn't have to worry about breaking parts. Maybe walking a crank though! :D

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

^main this is idk if I want to go through with all that. When I go to sell my car idk if it'll be easier or harder to sell a dsm on e85 or not. idk we'll see.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

never know.. might be easier. If i can get the talon fixed by then i believe ill try and bring my 91 Talon Awd - pte50 trim- 660's. afcII - 23psi ect. New clutch , master and slave. Also hopefully getting the turbo rebuilt by then, have a quick street tune and let her buck.