MitsuStyle - WTB/borrow: Mitsu housed turbo, oil feed line

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Want to buy (http://www.mitsustyle.com/forums/forumdisplay.php?f=80)

- - WTB/borrow: Mitsu housed turbo, oil feed line (http://www.mitsustyle.com/forums/showthread.php?t=19031)

turbotalon1g

04-03-2008 11:20 PM

WTB/borrow: Mitsu housed turbo, oil feed line

I need a mitsu flanged turbo setup for ext. gate on O2 housing and an oil feed line from the oil filter housing, did some testing and my motor doesn't put out enough psi at low rpm to use a head feed.

Aaron

User Name

04-04-2008 07:24 AM

Re: WTB/borrow: Mitsu housed turbo, oil feed line

I have a long feed line but it's missing a fitting on the filter housing side. RRE used a 90*. This just has the "female" end on it. The other end is good to go on the turbo.

All times are GMT -5. The time now is 03:01 PM.