WTB: Coupler 2.5"
 

Anyone have any spare couplers laying around? What I specifically need is a 2.5" black coupler, that is about a foot long, for my intercooler setup. Let me know, I got cash money!

Re: WTB: Coupler 2.5"
 

Sorry man, mine sold. Here's probably the next best thing.
http://www.siliconeintakes.com/detai...c3a81c6c20380a

Re: WTB: Coupler 2.5"
 

I hope I can find something local because I need it ASAP. If I knew you were going to sell it, I would have ordered it online a week ago.

Re: WTB: Coupler 2.5"
 

I have about 1 1/2' of 2 1/2" semi radiator hose. It's black heavy duty rubber that works well for couplers n' shit in a pinch.

You can get it at Napa for cheap but if you want I can bring it to my work tomorrow.

Re: WTB: Coupler 2.5"
 

That would work. You still up at Hyundai? What time you going to be there tomorrow? I'd take the whole 1 1/2' from you if you are willing to part with it all.

Re: WTB: Coupler 2.5"
 

Actually Brian, I'll send you a PM later. There's a couple diesel truck places right by my house, and I may stop in there after work and see if they have anything. And if they don't, then I'll grab your black 18 incher from you ;)

Re: WTB: Coupler 2.5"
 

LOL, ok let me know

Re: WTB: Coupler 2.5"
 

Dayco rad. hoses seem to work just fine and they are much easier and cheaper than the silicon stuff. As long as you dont mind black for the color.

Re: WTB: Coupler 2.5"
 

Are those the same as the semi/diesel radiator hoses? Just the flat black looking hose? That's what I think I'm going to be looking for at the diesel shop by my house.

Re: WTB: Coupler 2.5"
 

I dont know if it is exactly the same, but it probably of the same design. I've run mine at 28psi and no issues... The Dayco stuff is just a nice solid hose. And available from the local parts store and prolly just about any parts store.

Re: WTB: Coupler 2.5"
 

What diesel place by our house?

Re: WTB: Coupler 2.5"
 

Just picked up a foot of hose from Napa. For future reference, anyone looking for some it is Part Number 617. Cost was 19.46 for 1ft.

Thanks for everyone's advice and help.

Re: WTB: Coupler 2.5"
 

The Peterbuilt place right off 65 and 10. Back kind of by TNT. The smallest they had was 4" though. Napa hooked me up though.