MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   2g bov vacuum (http://www.mitsustyle.com/forums/showthread.php?t=18868)

dsm414 03-19-2008 05:49 PM

2g bov vacuum
 
just got an aftermarket bov. i installed it and everything but im not sure about something. there are 2 vacuum spots. now i know the one on the front goes to the throttle body like on the stock one. but there is one on the back but lower also..
do i let that vent into the atmosphere or should i run it into something.....i would think that i would want to t it into the vacuum between the wastegat and the turbo so im not waisting boost... but im not sure

Kracka 03-19-2008 06:53 PM

Re: 2g bov vacuum
 
Leave it open unless you are running an electronic boost controller.

dsm414 03-19-2008 07:50 PM

Re: 2g bov vacuum
 
no i am not running an electronic boost control.... but wouldnt that be waisted boost?

Kracka 03-19-2008 08:03 PM

Re: 2g bov vacuum
 
No, that nipple is on the other side of the diaphragm.

dsm414 03-20-2008 06:44 PM

Re: 2g bov vacuum
 
yea i got the big opening the vents back to the turbo, then rite above that is the nipple that vacuums to the intake and then there is one on the back on the lower side of the diaphram.... thats the one im trying to figure if i need to let it vent or vacuum it between the wastegate and the turbo

Kevin 1G Drummer 03-20-2008 06:53 PM

Re: 2g bov vacuum
 
Leave it open.

Kracka 03-20-2008 10:41 PM

Re: 2g bov vacuum
 
Quote:

Originally Posted by dsm414 (Post 233611)
yea i got the big opening the vents back to the turbo, then rite above that is the nipple that vacuums to the intake and then there is one on the back on the lower side of the diaphram.... thats the one im trying to figure if i need to let it vent or vacuum it between the wastegate and the turbo

LEAVE IT OPEN!


All times are GMT -5. The time now is 11:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.