6 bolt block, 7 bolt block, and other parts
 

I have a 6 bolt bare block that spun bearing. I have the oil pan, crank, pistons, and rods. Will need to be machined as there is scars on the cylinder walls. $75

7bolt block with head. Stock internals. #2 piston has bad rings. It was smoking before I pulled it out. Camshafts and gears are out of the head but comes with the head. Also has the intake manifold. No t/b. $300

I believe I have some 450cc injectors also. Not to sure if they are or not. Best offer.

1g and 2g fuel rail. Best offer

1 set of 1g rods and pistons. I got them when I bought my other block. I don't know if they are good or not. I haven't even looked at them yet. Best offer.

Dual pillar gauge pod for spyder's. $20

Stock front rotors with gst calipers and brackets. Rotors were not warped. Best offer.

2 uncrushed 1g bov. $20 each

18x7+42 5x114.3/5x100 Exel wheels on some 225/40/18 Hankook tires. Not much life left but can probably last you a summer I think??? Has 1 curb rash about an inch and a half. I was trying to paint them a different color but never had the time to finish them. Has some paint chips. Best offer.

Don't like the price? Send me offers. I probably have more stuff also but I'll update as I find them.

I'll try to get pictures up asap.

Will trade for:
-dsmlink
-tubular turbo manifold with mitsu flange
-SMIM
-2gb 17" GSX/talon wheels
-2gb gst wheels
-850cc+ injectors
-2g gst or gsx tranny

Re: 6 bolt block, 7 bolt block, and other parts
 

I have too much stuff in the garage! I need these stuff gone!

Re: 6 bolt block, 7 bolt block, and other parts
 

i might come get that 6 bolt from you. are those rods and pistons used?
i might also pick up those gauges from you

btw do you happen to have a 6 bolt awd tranny?

Re: 6 bolt block, 7 bolt block, and other parts
 

Yes the rods and pistons are used. I don't know how much miles or anything that are on them. I have 2 sets of 4 of the rods and pistons. 1 set spun a rod bearing, the other set seems fine. I do not have any tranny's laying around.

Re: 6 bolt block, 7 bolt block, and other parts
 

sorry about the delay, can you have the block ready on friday?

Re: 6 bolt block, 7 bolt block, and other parts
 

Sure, just send me a PM when you're ready.

Re: 6 bolt block, 7 bolt block, and other parts
 

pm ur 1g bov

Re: 6 bolt block, 7 bolt block, and other parts
 

pm'd u

Re: 6 bolt block, 7 bolt block, and other parts
 

is that 7 bolt a 1g or 2g???
if its a 2g will you separate pistons???

Re: 6 bolt block, 7 bolt block, and other parts
 

It's a 2g. I'm not gonna seperate anything for now, maybe if I get bored and want to tear up the block then I'll let you know.

Re: 6 bolt block, 7 bolt block, and other parts
 

you still got the gauges? might also be interested in the 6 bolt

Re: 6 bolt block, 7 bolt block, and other parts
 

do you have 1g injectors?

Re: 6 bolt block, 7 bolt block, and other parts
 

Yes I do, I'm not sure if they are 450's but they are blue.

Re: 6 bolt block, 7 bolt block, and other parts
 

Did you still have the 6 bolt? Give me a call I'm pretty sure I pmed you about it like a week ago with my number. let me know!