MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Rough... (http://www.mitsustyle.com/forums/showthread.php?t=1774)

santa 02-23-2004 01:21 AM

Well after putting the head back onto my car it runs but not that great... I think possibly I have one cam a tooth off on the belt or just my timing is off by a little bit. It doesnt pull at all like it used to.. it struggles to light them up in 2nd in the wet... I used to have no problem doing that on dry... So do you think my timing being off a slight bit could make it that bad? Im guessin so. Just wondering other opinion's? Everything else is fine...just that oh and after driving for a bit and letting it warm up after pushing the clutch in after a quick little rev to say...4k it will idle down and just end up dying but when I start it up again It idles fine...? timing again?

Raptor 02-23-2004 01:49 AM

Yea, I would say it was probably off. It doesn't have to be that much to make it run like @$$.

santa 02-23-2004 02:43 PM

im gonna check it today see whats up.

santa 02-25-2004 07:17 AM

oh man my timing was way off were guessin around 20 degrees retarded... lol its set and runs like it used to !!!!!!!!!!!!!!!!

Iceman 02-25-2004 08:02 AM

Quote:

Originally posted by santa@Feb 25 2004, 07:17 AM
oh man my timing was way off were guessin around 20 degrees retarded... lol its set and runs like it used to !!!!!!!!!!!!!!!!
was it degreed wrong or was a tooth off?

MatriX 02-25-2004 10:41 AM

Ya something wasnt right...cause it wasnt pulling 1/4 as it used to glad to hear shes back up!!


PS you get that WGA issues fixed?

santa 02-27-2004 12:38 AM

timing was off the tooth is not off its on... no wga fixed yet... check on those seals too yo!

MatriX 02-28-2004 11:36 AM

Ya ill check when i get to work on thoes seals for ya i always forget when im not busy!!


All times are GMT -5. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.