3" 2-bolt exhaust gaskets - where to get locally?
 

Who knows where to get these. Please don't just say 'did you check napa?' because yes I have, and they are deedeedee. Who knows a specific place to get these? :D

Thanks in advance!

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Last time I went to MAS Racing on university to get a bottle filled I noticed they had a bunch of gaskets.

Might be worth a shot (651) 644-6811

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

call craig he will be back from la tonight

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

I already told ya bitch, Exhaust Pro's!

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

I'm just looking for another place JET! :D There's not one anywhere near me at all! I don't want to drive all the way to blaine unless I have to.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

I found one at Napa. I've bought them from O'rileys to but they have to order it.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

this made me lol :)

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

I know Napa can order them and have them next day. Midas or Meineke probably have them also. Search qwestdex.com for exhaust systems.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

buy a roll, and cut your own gasket.

-A. Swift

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

For an exhaust gasket? Silly kids. :lol:

-J. Thompson

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

If you find some, let me know. I searched every auto parts store and found none. I forget what my bolt center to center measurement is, but no-body could get me the gasket. Not even the place that sold me my flanges could get me a gasket. I ended up going to TNT and they had a sheet of gasket material that they said is made for exhausts, so I'm using that right now. Otherwise, I've gone all over the friggin place and always left empty handed. This winter I'm switching to Vband flanges so I don't ever have to deal with it again.

-B. Bender

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Brandon, the Exhaust Pro's right up the road from you has them. They actually have a dynojet in there too. It is pretty close to the Welle up there, 242/65.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Hmmm ok. Well I'm switching to V-bands now anywho. I wish I would have known that for the past 1 1/2 years though. I hate exhaust leaks.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Yes, for an exhaust gasket..silly old people.

There's a place you can get a roll of stuff, made specifically for your exhaust, to use as a gasket! I'm not talking the same stuff as you'd make a thermostat housing gasket with. It's silver, reflective, and I've used it before at honda..works well.

-A. Swift

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Red Rooster always had some.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

That stuff isn't going to work on a 3" 2 bolt flange, they have a hard enough time sealing with the crush gaskets. I prefer 3 bolt flanges for 3" pipe, you get a much better seal.

-J. Thompson

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

Muffler Man in Hudson.

Re: 3" 2-bolt exhaust gaskets - where to get locally?
 

craig has them at his store in brooklyn center orileys (right by brookdale off 100) and there new wearhouse is undera5min drive so all parts that he does not have will be there fast. By the way his store has the most crap for dsm's I just dont know why LOL