balance shaft eliminator kit??
 

i was on slowboy racing and i was looking for a bsek for a 7bolt and the one they have doesnt say witch motor it will work in.. so i want to know if they are the same?

Re: balance shaft eliminator kit??
 

They are the same, you're about to pay too much for that kit though ;)

Re: balance shaft eliminator kit??
 

Re: balance shaft eliminator kit??
 

Hmm never seen that kit before. I would personally be a little weary of non-OEM components, but then again your just blocking it off lol.

Chris

Re: balance shaft eliminator kit??
 

WTF dude, problem number one is shopping with Slowboy. Go read their intro thread here and see how awesome they are to work with and how cool they are. DO NOT give them money, they do not deserve it!

Re: balance shaft eliminator kit??
 

I used the parts dinosaur kit for my 6-bolt. No problems. In fact, it's nice that you are not using bearings with oil holes. They are solid so orientation is not an issue. Plus it's $15.

Re: balance shaft eliminator kit??
 

that is the same kit that I have put into every motor that I have done. It is the same as the safty brand one you can buy at oreillys auto parts. I get them there because my bro work's there. They work for a 6 or 7 bolt

Re: balance shaft eliminator kit??
 

Are the parts dinosaur ones missing the oiling groove?

Re: balance shaft eliminator kit??
 

The vendors need to stop spamming their goods in the Tech Forums. :angryfire:

Take it to PM's.

Re: balance shaft eliminator kit??
 

thats the one I have and it works just fine!!!

Re: balance shaft eliminator kit??
 

i know slowboy kinda sux i have had a go around with them befor but i was just looking to see if the kits were the same cuz i have 2 kits laying around

Re: balance shaft eliminator kit??
 

Works great in every car that I've seen. As far as OEM parts its just personal preference.:cool:

Re: balance shaft eliminator kit??
 

The ultra cheap way to do the elim is leave the front shaft in the motor, then cut the rear shaft (as close to the pump housing as possible) then weld the hole or tap it for a M8x1.25 thread and use a spare bolt with some rtv on the threads.

~John

Re: balance shaft eliminator kit??
 

Please note that I also answered his tech question which you have since deleted :confused: Yes the 6 bolt and 7 bolt BSE's are the same.

Re: balance shaft eliminator kit??
 

Noted.

Re: balance shaft eliminator kit??
 

can anyone give me an idea of how to get the center bearing back in.. keep in mind i am doing this with the motor in the car...