MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   The Parking Lot - On & Off Topic (http://www.mitsustyle.com/forums/forumdisplay.php?f=21)
-   -   Dyno Prep Day Party at My House! (http://www.mitsustyle.com/forums/showthread.php?t=17220)

scheides 10-09-2007 11:42 PM

Dyno Prep Day Party at My House!
 
So S2kracka needs some exhaust on his 1G and we may be swapping in some ported parts that need to be installed.

X-factor has an intake and exhaust for his 4G that need to be installed.

I have plugs and oil to change, boost leaks to test for, and ....something else I can't think of just now.

I have a beer fridge with beer to drink, and a wife that will be out of town.

Friday night and Saturday I am going to open up my house and garage to anyone that needs a little help getting their car ready for the dyno day next weekend. I don't want to start any projects we can't finish, but I'm glad to lend a hand and provide a place for people to gather and get stuff done.

Grab your parts and some extra tools and come on over to my place Friday night or saturday, we'll hang out, get some stuff done, and have a good time! Bring some cash for pizza, maybe some beer or whatever, and please do not come if you want free help on your car with zero effort on your part. I'm willing to help as much as you are :D

Google map to my house:
http://maps.google.com/maps?f=q&hl=e...wloc=addr&om=1

7pm friday, 9am saturday. Stop by if you're bored, but come ready to work :D

blageo23 10-09-2007 11:45 PM

Re: Dyno Prep Day Party at My House!
 
How about I tow my car to your house and you get my flywheel fixed :). I guess I could loosen a bolt.

Kracka 10-09-2007 11:46 PM

Re: Dyno Prep Day Party at My House!
 
I'll be there bright and early Sat morning!

My list:
install 3" turboback exhaust
install ported 2G exhaust manifold
install tubular o2 housing
port 14b exhaust housing to match manifold
install front brake rotors
gap spark plugs

scheides 10-09-2007 11:48 PM

Re: Dyno Prep Day Party at My House!
 
Hughes, BYO porting bits! I have a few left but not enough!

Swifty1638 10-09-2007 11:51 PM

Re: Dyno Prep Day Party at My House!
 
My list....um...park the car. That's right, I'll be a pussy. Turns out the AEM EMS was the culprite, so I need to send it in to get fixed. That means no car for the rest of the season..sok though..NOS and intake mani come on Sat!!!

-A. Swift

scheides 10-09-2007 11:54 PM

Re: Dyno Prep Day Party at My House!
 
blageo, I don't think we have quite enough time for that, and I don't have quite enough tools for that (no engine hoist/engine support to hold motor while tranny is out), but if you really really want to and we can rile up enough support, I have no problem with this as long as your car is out of my garage come noon sunday :D

ALSO!!!! One thing I forgot to mention: Any EVO guys out there that want the NLTS/KnockCEL/Valet mod/patch put on their car, I'd be up for doing that as well if we have time. I have everything we need to do it.

blageo23 10-09-2007 11:57 PM

Re: Dyno Prep Day Party at My House!
 
Dang, I have to pull the engine on my winter car this weekend anyways to do the headgaskets(boo to subarus and thier shitty HGs).

Kracka 10-10-2007 12:04 AM

Re: Dyno Prep Day Party at My House!
 
Quote:

Originally Posted by scheides (Post 211936)
Hughes, BYO porting bits! I have a few left but not enough!

For sure, I'll get a pack or two of the kind we used on your EVO parts.

sleepydsm 10-10-2007 12:22 AM

Re: Dyno Prep Day Party at My House!
 
Quote:

Originally Posted by S2kracka (Post 211944)
For sure, I'll get a pack or two of the kind we used on your EVO parts.

I "borrowed" a few from school, some fancy dancy real solid carbide ones typically used in jig grinders, they HOG through cast iron with such ease... you should be jealous basically lol.

scheides 10-10-2007 12:24 AM

Re: Dyno Prep Day Party at My House!
 
Quote:

Originally Posted by sleepydsm (Post 211947)
I "borrowed" a few from school, some fancy dancy real solid carbide ones typically used in jig grinders, they HOG through cast iron with such ease... you should be jealous basically lol.

So you're bringing those over or what? :D

sleepydsm 10-10-2007 12:24 AM

Re: Dyno Prep Day Party at My House!
 
And blageo and I could do his tranny in definately less than 6 hours.

scheides 10-10-2007 12:26 AM

Re: Dyno Prep Day Party at My House!
 
Quote:

Originally Posted by sleepydsm (Post 211949)
And blageo and I could do his tranny in definately less than 6 hours.

Bring your stuff and the car and lets do it.

blageo23 10-10-2007 12:48 AM

Re: Dyno Prep Day Party at My House!
 
I did a rear main seal in 6hrs dickin around

Matt D. 10-10-2007 07:55 AM

Re: Dyno Prep Day Party at My House!
 
I'm pretty sure I've seen a transmission removed in just about an hour. :nod:

Either way I will be there and will bring some grubby clothes with in case I'm needed to get dirty.

X Factor 10-10-2007 09:00 AM

Re: Dyno Prep Day Party at My House!
 
Awesome, so not just sunday then?

I'll try and be there as early as possible saturday, depending if I drink friday night between 10-11ish I would think (not sure how far of a drive from my house it is).

651-497-8866 in case you need to contact me.

Also any beer preferences? Otherwise i'll grab my fave :JD:

Kracka 10-10-2007 09:02 AM

Re: Dyno Prep Day Party at My House!
 
It was changed from Sunday to Saturday.

As for beer...something good :)

AwdGSX13 10-10-2007 09:44 AM

Re: Dyno Prep Day Party at My House!
 
I can lend a hand if anyone needs, also id like to meet you guys. I always try to get out to these social events but something always takes my time away lol..

Kracka 10-10-2007 09:58 AM

Re: Dyno Prep Day Party at My House!
 
Porn? I hear ya there ;)

TkrPerformance 10-10-2007 11:18 AM

Re: Dyno Prep Day Party at My House!
 
I will be there with the ''other'' and to hang out

AwdGSX13 10-10-2007 11:22 AM

Re: Dyno Prep Day Party at My House!
 
Quote:

Originally Posted by S2kracka (Post 211979)
Porn? I hear ya there ;)


you too huh? thought i was the only one.. thank god.


All times are GMT -5. The time now is 01:58 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.