Where do we get a o2 housing for this turbo...
 

Hey guys my buddy is picking up the turbo pictured in the below pics. I was wondering where we are supposed to get a o2 housing for this turbo? I havent seen this bolt pattern before.
Its a T3/T4 50 trim turbo made by a company called Master Power (personally never heard of them, but he picked it up for $300) he is also picking up a Manifold for the T3, with the wastegate flange on it.
Any ideas?

Re: Where do we get a o2 housing for this turbo...
 

Looks like a normal T3 exhaust flange.

Re: Where do we get a o2 housing for this turbo...
 

That's just a typical 5 bolt t3 flange. Here's a decent internal gate setup

http://www.atpturbo.com/Merchant2/me...egory_Code=WGT

Re: Where do we get a o2 housing for this turbo...
 

Yeah, I couldnt find a o2 housing, so we ended up going on egay and finding a T3 Flange, and a Exhaust flange, and im going to make an o2 housing. We should be able to make one for under 40 bucks.

Re: Where do we get a o2 housing for this turbo...
 

BTW has anyone heard anything about this Master Power turbos? Are they good, bad or what?

Re: Where do we get a o2 housing for this turbo...
 

Kyle makes great o2 housings. I love the one he made for me

Re: Where do we get a o2 housing for this turbo...
 

Just curious how much you paid for him to make your o2?

Re: Where do we get a o2 housing for this turbo...
 

OK i gotta bring this thread back up. I decided that i would make the o2 housing myself for him. We decided to get a T3 flange from ebay, when we got it, only 2 of the holes lined up. the flange looks wrong. So we took it to a local shop and they had the same flange that we had gotten from ebay. Has anyone seen this before with master power turbos? It says T3 on the turbo itself.

Re: Where do we get a o2 housing for this turbo...
 

Quit buying turbos and flanges from eBay.

Re: Where do we get a o2 housing for this turbo...
 

No doubt! You could be rocking a ported 2G o2 housing and internally gated PTE 50-trim for the $$ you're wasting on all this crap!

Re: Where do we get a o2 housing for this turbo...
 

Its not mine!!!!!!!! The flange is the same one that another local shop (dynamic autosports - who used to (or still is) be a distributor to elite). The turbo was from another guy on dsmtuners. My friend bought this setup. The flange should be a t3 one. Which brings me to the question of whether the turbo pictured above (a master power T3 50 trim) is different then every other t3 turbo out there, or what?

Re: Where do we get a o2 housing for this turbo...
 

Who knows. Master Power is a Brazillian turbo company and you usually only find them on eBay in real and knockoff form.

Re: Where do we get a o2 housing for this turbo...
 

damn looks like ill have to make a flange that will work