![]() |
bloody mary
Well here she is the latest project to begin going underway here in a short while. I recently acquired this car from a friend of mine, i helped him put a tranny in his other talon, so as payment he gave me this one and a flat black one. So here is the story
My buddy bought this car with the intentions of building it up and racing it, but soon his hopes had deminished, after the compression numbers came back in the low 30s on two of the cylinders he gave up, and bought a different car, leaving this to sit and rot. After a phone call, i helped him put a tranny in his new all wheeler, so after that payment was the 2 all wheelers he had sitting there. After picking them up i brought them to the shop, the 90 flat black all wheeler is plagued with cancer, but the red one is glossy and in overall decent shape. After removing the head in preperation to replace the rings and bearings in the motor, i found that the pistons had been kissing some valves and got some canker sores. So thats how the car sits now, headless, trannyless, and clutchless. This is going to be a budget build for me, just to see what a minor freshing up will do for a pretty much stock car. I am budgeting myself to what i have in the garage, and 500 bucks. I am not going to be doing a turbo upgrade, but i am going to be upgrading everything that i can around it. So here is what i have so far that is going to be going into the motor and driveline. act 2100 clutch with stock flywheel new oem rings new acl race bearings arp headstuds mitsu mls headgasket mild port work on the head ported 14b turbo ported 2g manifold ported 2g o2 housing eibach sportline lowering springs autometer boost, and oil pressure gauges on a-pillar street tires 3in turbo back exhaust manual boost controller walbro 190lph fuel pump evo 560cc injectors safc basically i have everything in my garage except for the fuel injectors, the boost controller, the exhaust, and the safc. I am going to try shooting for a low 13 sec run or a high 12. If i have enough money left over, a set of cams may be in he cars future, but who knows. But anyway here are some pics of how the car looks as it sits http://www.imagestation.com/picture/...6/e84988fb.jpg http://www.imagestation.com/picture/...e/e8498900.jpg http://www.imagestation.com/picture/...8/e8498907.jpg And here it is the first day i saw it not much has really changed http://img261.imageshack.us/img261/9334/cimg0157zo6.jpg http://img261.imageshack.us/img261/8972/cimg0156ir4.jpg http://img261.imageshack.us/img261/8577/cimg0155in8.jpg |
Re: bloody mary
and for those of you curious about what the black one looks like, here are a couple of pics of that as well
http://www.imagestation.com/picture/...4/e84988e7.jpg http://www.imagestation.com/picture/...0/e84988f3.jpg The passenger rear quarter has some bondo on it along with the passenger fender, this is just going to be the parts car for my project drag car, and this project which is nicknamed bloody mary |
All times are GMT -5. The time now is 12:06 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.