DSM from Augusta GA
 

Hello fellow DSMers. My name is David. I drive a 1997 GST Eclipse Spyder, hopefully GSX Spyder in the upcoming year. Anyways from Augusta, Ga. I have owned my DSM for a year this month but it took me 3 years to find one I wanted. I am a mechanic at a shop called Simply Automotive. First boosted car I ever rode in was a FWD Talon 21lbs of boost on a 14b... even though the guy that gave me the ride knew nothing about what he was doing with boost it was enough to make me fall in love. :evil:

Anyways enough rambling. Here is some pics of the car.

When I first got her.

http://a755.ac-images.myspacecdn.com...04829754_l.jpg


http://viewmorepics.myspace.com/inde...mageID=1790077

You can't see it here but the hood was pushed in on the passengers side pretty bad but I fixed that.


http://a311.ac-images.myspacecdn.com...bd94828f9e.jpg


Here she is now. Had to use my phone because camera WENT BOOM after my first FMIC pic. lol

http://a41.ac-images.myspacecdn.com/...d3ba312978.jpg

http://a698.ac-images.myspacecdn.com...cce2aac3e1.jpg


Blew up too many 14bs decided to go a new route...
http://a829.ac-images.myspacecdn.com...aed586c6ec.jpg


This pic is before I got my FMIC but probably the closest to date of how the engine bay looks.

http://photos-536.ll.facebook.com/ph...73650_6228.jpg


And then the mods list.

Motor: 6bolt block/crank, 8.5:1 Ross pistons, ARP headwear,Prothane motormounts, Mitsu triplelayer headgasket,Clevite Brearings, Eagle H-beam rods,and balanceshafts removed.
Fuel: Walboro 255, Weapon R adjustable fule pressure regulator. (need some 650cc's but no money :(. )

Intake: FP 4inch intake, 92' throttle body (freshly rebuilt ,GM MAS, HKS SSQ BOV, 22"x9"x3 FMIC and 2.5inch Aluminum hardpiping.
Turbo: Bullseye 57trim
Electronics: Black SAFC II, 2gen GM translator, 35lb boost and oil preassure gauges all Autometer in the 3 pod a pillar, OBDII datalogger & Black Greddy turbo timer.
Exhaust: RRE 3inch catless DP, full 3inch Thermal R&D exhaust, ported 02housing and Ported GT exhaust manifold.
Drivetrain: Underhood shifter bearings,CC lightweight steel flywheel, CC stage 2 (2600lb) Clutch, and Sheppard Tranny Stage 2 with LSD.

Future mods: DSM link V2, 650cc injectors, Magnus Stage III head, JMF intake manifold, FP 2Xs, AEM wideban, tubular o2 housing, Tial 38mm WG and find a rolled AWD 2g so I can start having fun and let Shep build me another tranny.




Right now only on 14lbs of boost and raping Evos out the hole... Stock... :( lol Still fun to do.

Re: DSM from Augusta GA
 

Car looks good. Very clean engine bay. I've got the same color 2g but mine is a gsx. I really like the all black look for the engine bay and after seeing yours my mind is swayed a little from what I was thinking about. Any updated pics with the ic pipes in? I'm really curious to see how it looks. I was thinking about powdercoating mine black but idk

Re: DSM from Augusta GA
 

Not yet but I will take sum tomorrow when I get off of work. I need to take her out to get washed anyways. Just for refrence blk pippin with HKS where the fuse box would be and fuse box relocated off the side of the battery box with the pipping going over it. lol Plus I havent put the "bling bling" heat shield on yet it makes its look 100000 times better.

Re: DSM from Augusta GA
 

First off, it's "piping." And I don't really know what your saying. Are you describing your setup? Are you intercooler pipes black?

Re: DSM from Augusta GA
 

Yea I was describing my setup and the pipes are blk.

Re: DSM from Augusta GA
 

Nice car but black housing headlights need to go back on it imo.

Re: DSM from Augusta GA
 

Nice car. I've been to Augusta quite a few times. Stayed at the newer Holiday Inn off I-20 and Belair. Kinda dated one of the bartenders at Macaronni Grill there too. I was working down at the Vogtle nuke plant.

Anywho welcome!

Re: DSM from Augusta GA
 

Wow your are the first person to say that. Most ppl say they do not like aftermarket headlights but they like the way mine look. O well ur opnion. :)

Dang plant vogtle is a good ways away from beliar rd. I live on Westside of Augusta not too far from there. I live pretty close to Macaronni grill actually.

Re: DSM from Augusta GA
 

Ya, it was about a 45 minute drive to the plant everyday. And that was with me flying down the road that goes all the way to the plant (I forgot the name). I was down there during Masters too.

Some other places we went was the Pizza Shack or something like that, Texas Roadhouse, and tried to go into some Club Velvet but I was 24 and you have to be 25. I don't know if I really like the area though. Some plant made everything reak of sulfer, and I've never had alergies in my life until I went there and the air was 50% pollin.

Re: DSM from Augusta GA
 

Yea pollin is pretty bad down here. Probably went to pizza joint pretty good eating. The smell u are talking about is on Southside from the paper mill. Masters is fun for tourist sucks for us.

Must have been a while since you have been down here.

Re: DSM from Augusta GA
 

Well not that long ago. It was just this last Masters I was down there. I was there for my birthday actually too, on April 3rd. Wasn't really that long ago.

Re: DSM from Augusta GA
 

Bah just take a picture already! I wanna see the black pipes!

Re: DSM from Augusta GA
 

very nice car. I get alot of parts from j-hot there for the evo III

Re: DSM from Augusta GA
 

Took some pics with the phone but for some reason when I emailed them I could not see them so I need to borrow my G/fs computer/camera and have a photo shoot. :) Thanks TK yea Jhot is good for a project like that.

Re: DSM from Augusta GA
 

Welcome!!! Clean whip