![]() |
Bye bye FWD!!!
Well it has been a long process with my car. First it was a 95 FWD talon and then I swapped my parts into a 97 Spyder. I was just getting it ready to dyno after the E-85 conversion and now second gear lost a few teeth.
Now is time for 97 Spyder AWD! I have beed thinking about doing this but have a reason to do so now. So far I have the rear end, gas tank, and the drive shaft. I am in the process of looking for the other nessicary parts but will keep the progress updated. Pictures to come. Let me know what you think or if I should do anything else along the way. |
Re: Bye bye FWD!!!
everyone is doing the swap now. good luck if you have any questions just ask me
|
Re: Bye bye FWD!!!
One question is do I need the rear suspension or just the spindles? And do I need the wiring for the gas tank from an awd shell? PM me if you have any things that I should for sure know that I might miss. Thanks for the help TKR
|
Re: Bye bye FWD!!!
you will need the rear end the fwd knuckles are the same just need the hubs
you will need the fuel tank wiring |
Re: Bye bye FWD!!!
If you need help with it call me
|
Re: Bye bye FWD!!!
Thanks for the help and ill probably be calling you BLAGEO. TKR do I need the front hubs or just the back?
|
Re: Bye bye FWD!!!
You need to change your sig. now
|
Re: Bye bye FWD!!!
just the rears
|
All times are GMT -5. The time now is 12:08 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.