MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Tuning/Electrical (http://www.mitsustyle.com/forums/forumdisplay.php?f=90)
-   -   afpr help (http://www.mitsustyle.com/forums/showthread.php?t=15621)

kennydawgg 05-20-2007 11:32 PM

afpr help
 
ok put in a new adjustable fpr and im having some issues. when the key is on and car is off the gauge reads 0. when running it says 0, I got the gauge to move a bit when I revved it. but I havent got it to move again.

if the vac line has a leak would this cause the problem? could my fpr be bad? what should it read if the fuel pump is on and the motor is not?

thanks

Swifty1638 05-20-2007 11:47 PM

Re: afpr help
 
if it's on, and the motor is off, it should read whatever the FPR is. Did you try to raise/lower the fuel pressure? You could have a bad gauge. What kind of setup is it?

-A. Swift

kennydawgg 05-22-2007 10:14 PM

Re: afpr help
 
I tried adjustng the screw and nothing, its just a cheap ebay one

Shane@DBPerformance 05-22-2007 11:00 PM

Re: afpr help
 
The gauge is broke. The car wouldn't run with 0 psi of fuel pressure. Get a different gauge.


All times are GMT -5. The time now is 05:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.