Dent Removal with Airduster and Hair Dryer.
 

My gf just sent me this link, because her honda has tons of big dents. Anyone ever try this. Im gonna try it on her car.
http://www.metacafe.com/watch/501379...ith_airduster/

Re: Dent Removal with Airduster and Hair Dryer.
 

Doesn't work.

Re: Dent Removal with Airduster and Hair Dryer.
 

How so? Videos cant lie

Re: Dent Removal with Airduster and Hair Dryer.
 

How about the dry-ice method? Anyone tested that one yet? I have some dents I'd like to take out. Also, in SouthDakota I seen it forsale at Super Walmart

Re: Dent Removal with Airduster and Hair Dryer.
 

The video never cut out. im going to try this tonight and post the results.

Re: Dent Removal with Airduster and Hair Dryer.
 

I swear with that big of a dent you could have gone inside and pushed it out with your hand. But I would like to see if this works.

Re: Dent Removal with Airduster and Hair Dryer.
 

Yea it didnt do anything to the small dent right next to that big one :)

Re: Dent Removal with Airduster and Hair Dryer.
 

...just like how you can unlock car doors with a tennis ball.

Re: Dent Removal with Airduster and Hair Dryer.
 

How?

Re: Dent Removal with Airduster and Hair Dryer.
 

[sarcasm]

http://youtube.com/watch?v=P0j-mQuGg-0

Re: Dent Removal with Airduster and Hair Dryer.
 

The key with the method is that it needs to be a fresh dent to work. It works with a hair dryer and dry ice. Ever seen a car with hail damage and it gets better when it sits in the hot sun? Metal has a memory, so it wants to go back where it was. As it stays like that the memory goes away, so it won't work on an older dent.

Re: Dent Removal with Airduster and Hair Dryer.
 

Haha, wow. I've never heard of that. It sure is good to know you can carry a tennis ball instead of a large and awkward spare key.

Re: Dent Removal with Airduster and Hair Dryer.
 

That tenis ball thing is great. Im gonna have to try it(sarcasm).

Re: Dent Removal with Airduster and Hair Dryer.
 

I'm calling BS on that one. That would be like unlocking your car by putting the key in the lock without turning it. If, that is, you could even create enough pressure to lift all the tumblers. Lock cyllinders aren't exactly a sealed unit.

Re: Dent Removal with Airduster and Hair Dryer.
 

PDR work is not that expensive if you know someone that does it. I have a full PDR kit that I bought a couple of years ago, haven't had time to learn it so it sits under my workbench. It's an art.

Re: Dent Removal with Airduster and Hair Dryer.
 

PDR is a pain in the ass to learn. I've tried it on a couple jobs at work, and failed miserably. It's definatly not something you can figure out in a couple hours.