![]() |
boosting a free sohc 4g64
I am working on a 94 galant sohc 4g64 a friend got for free because some guy didn't want to have to deal with it. We noticed that the exhaust ports were the same as a 1g turbo 4g63, so for fun we took a manifold and turbo off a 90 gsx. It was bolted on along with a cheap fmu. Thinking we might get it to work cheap we have about $200 in it and it runs fine except for when it starts to boost. It tottaly falls on it's face. I was wondering if any one knows or even has any ideas on what we can do to make it work.(ex: different maf, safc, anything) thanks.
|
Re: boosting a free sohc 4g64
Injectors, fuel pump, too much air not enough fuel.
|
Re: boosting a free sohc 4g64
Fuel management?
|
Re: boosting a free sohc 4g64
ecu??? check if it is the same as a 2g.... then mas..... 450 injectors... and then afc.... i noticed that it was all the same too but mine is an auto and no point....
|
Re: boosting a free sohc 4g64
Quote:
|
Re: boosting a free sohc 4g64
upon further review the mas is the same as every other dsm so it has to be just more fuel right? We will try my safc I dug out of my other talon project. does any one know how far the stock injectors will get you? I might just grab my stock 2g injectors too. Thanks for the ideas. Let me know if you think of anything else.
|
Re: boosting a free sohc 4g64
Quote:
|
Re: boosting a free sohc 4g64
the 450s will burn up the ecu you need the resistor pack that the goes with them. other than that they are close to a 4g63. I think the stock ones are around 280cc but don't quote me on that I just know its in the 200s. check out www.club3g.com and look at their threads about it many people have boosted those motors and there is a lot of info on that site about doing it.
good luck, I only have about three more parts to gather and I will be doing the same thing. |
Re: boosting a free sohc 4g64
cool man thanks for the info agin. I will go check out clube3g I didn't even think of that.
|
All times are GMT -5. The time now is 09:16 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.