Vassil's Winter Project (25.1E chassis + RWD)
 

I figured that since Tim let the cat out of the bag ... I might as well too. The GSX is getting completely hacked apart and becoming a RWD tube car.

Here is some history ....

I got the car from Steve Hill and had the moronic idea of having a nice 12 second daily driven car. After buying a 3" Thermal it was all over. The car got a built motor, an FP3052 & some supporting mods. It made 451WHP and ran a 12.1 ... later on that was not good enough .. the madness continued to an 11.5, then an 11.2 ... and 11.1 and finally a 10.97@128.99. Best trap was a 129.98 with a whopping 1.88 60ft time :)

I stripped the hubs of my Quartermaster this fall and the car was down for a while. So Tim (EvilEvo) and I decided that both the EVO and the DSM will get lighter and get bigger turbos. Initially we both wanted to partially tube the front and cut out the rear floor. Then somehow with the help of a lot of Vodka-Redbulls we decided that we should go RWD ... then later it all evolved into lets hack the cars apart, sell all the stuff we don't need (everything), buy a welder ... learn to TIG weld and build 2 full tube chassis cars.

My FP30 and some other parts turned into a Miller Syncrowave 200, we rented a garage, bought a ton of pipe from the local FleetFarm, a chopsaw, united all the tools and started practicing. Initially there were some really disappointing moments, kinda like WTF did we just do ... but as time passed we got more confident and started seing the light at the end of the tunnell.

Enough with the BS ... back to the project at hand. The idea is quite straightforward. Remove floorpan fron the DSM, cut the front, built a 25.1E tube chasis from chomoly ... fit it in the DSM, get big-ass tires and auto tranny, a beefy rear-end, a GT4202RV, fab whatever is necessary and go fast.

Here are a some pictures of the progress ... Hopefully it will be road-worthy later on this year and be in the single digits.

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

More pics

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Last one ...

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Jebbers, it's like the Flu down there and it's fuck'n spreading. This is fuck'n awesome you guys.

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

I think my quest will need the same treatment. Can I pay you in vodka? ;) Sweet project(s).

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Sweet jeebez you guys are nuts! Do you guys have to wrestle the welder away from each other or what? ;)

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

There are going to be some sweeeet cars out there this year!! Cant wait to see more progress!

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

wow alot of work since i last saw. your making me ou to be the slow guy in winona, but at least im the only one on the road. keep up the good work

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

You guys need to get these cars down to Tri-State Raceway in Earlville for their initial runs. :D

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

HAHA!... Yeah, I think they put something in the water. :D

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Will it run on vodka?

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Fleetfarm sells Chrome Moly DOM tubing? It looks like you can re-use your lower frame jig, looking good.

~John

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

WTF is in the Vodka down there?
You guys are nuts, well i guess crazy in a good way, it takes a lotta balls to do something like this.
Congrats to you all you guys and good luck.
It was awesome to see you run your 10 sec in person,
Good luck and i can't wait to see these cars this year.

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

No, haven't wrestled over the welder yet. Both projects are in different stages, so it kinda works out nice.

Fleet Farm does not sell chromoly (although if they did I would be their #1 customer). We just bought quite a few 10' sections of crappy pipe to practice notching and welding different angles.

As far as the Vodka down here ... it really isn't anything special. We just like drinking it. I am from Bulgaria so I guess that stuff is in my genes.

And yes the project goals are reasonably high, but if any of you have ever visited Winona you probably noticed that there isn't much to do around here.
You can go to bars and admire/take advantage of the abundance of college ass, drink, party, work or dedicate yourself to a hobby. We try to do all of the above while putting a decent amount of emphasis on the last option :D

... And Shane ... if Vodka had enough octane and redbull had decent lubrication properties I'd run the car on that s*it :D:D:D

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Imagine how I feel....lol 14b powah

Awesome project.

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Do they eat pickles with vodka in Bulgaria?

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Damn Vassil, I was wondering what you were doing when I saw you selling stuff off on NABR. Are you going tuck the slicks way under, or leave the back high like Buschur's old RWD? I'm guessing by the slpe of the fenders inward toward the roofline, you'd either have to mount the slicks way inboard, or keep the rear fairly high. Looks awesome, you guys have got balls. Let the Grey Goose flow!!!!

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

You guys make us all seem like straight alcoholics :) I guess maybe we sorta are but wow.

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

Hey, stay away from my sister! She goes to Winona! LOL

Did I read you guys right? You are going to cut up the evo too?

Awesome project!

Re: Vassil's Winter Project (25.1E chassis + RWD)
 

If you read the other thread, you would already know by now. All three of these cars in garage at one time. I just can't imagine how much fun you're having. Who's leg is that threw the firewall? I would have dared him to stick his dick in the firewall and kicked him dead in the ass.......