WTB Valve Springs, 650 Injectors, Head gasket
 

I am looking for a set of stronger higher reving valve springs and reatiners preferably titanium or equivelant. I am also in the need of 650 injectors. Lastly I need a headgasket that will easily hold 30 lbs of boost.

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

We sell a high rev spring and chrome moly retainer kit $279.99. These are a crower compariable spring and chrome moly retainer.
Stock head gasket will easily hold 30psi with arp's and proper tuning.

680cc injectors are $249.95 and are available within 3 business days.

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

I have a set of PTE 680 injectors I'll sell you for $165.

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

Good deal!

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

Ok I have narrowed it down a bit. I need a set of valve springs and retainers that will go good with the Crower Stage 3 64114 cams and rev up to 8000-8500 rpm. I am also looking to buy FIC 650cc injectors or equivelant because htat is what is the default on the dsmlink chip I am buying. Lastly i think that I want a cometic metal head gasket because I had one last time and had good luck with it. Let me know and send me prices via PM. Thanks

Also what do you think 650cc's will go up to for hp with all supporting mods to max them?

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

This is Halon...

I have a set of FIC 650's if you want them. I am leaving for Georgia tomorrow though. So you'd either have to get them today, or in 2 weeks when I get back.

612 384-1425

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

/\/\ That was me, sorry.

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

We have Brian Crower springs/retainers available for $209.99, they will definitely work well with those camshafts!

http://www.maperformance.com/store/p...3&cat=0&page=1

As far as a head gasket unless you are getting your block/head resurfaced we would recommend our SCE ICS Titan gasket for $109.99, otherwise with proper machining the Cometic will be a great choice for $79.99!

http://www.maperformance.com/store/p...cat=294&page=1

http://www.maperformance.com/store/p...cat=294&page=1

Re: WTB Valve Springs, 650 Injectors, Head gasket
 

Springs and retainers found, just need the injectors and dsmlink. I think ill go with the 880's or something like that now instead since I am getting link. Let me know if you have either.